The goal of this series is to support the Goodix GT7375P touchscreen.
This touchscreen is special because it has power sequencing
requirements that necessitate driving a reset GPIO.
To do this, we totally rejigger the way i2c-hid is organized so that
it's easier to jam the Goodix support in there.
This series was:
- Tested on a device that uses normal i2c-hid.
- Tested on a device that has a Goodix i2c-hid device.
- Tested on an ACPI device, but an earlier version of the series.
I believe the plan is for Benjamin to land the whole series. Will
said this about the arm64 defconfig change (and provided his Ack):
...there are a few things I really care about
in defconfig (e.g. things like page size!), generally speaking we don't
need to Ack everything that changes in there.
That said, might be worth checking whether arm-soc have any defconfig
changes queued in -next so you don't end up with conflicts.
Changes in v9:
- 120 ms delay => 180 ms delay
- Local variable in ACPI code "ihid_of" => "ihid_acpi".
- Squash Benjamin's change for ACPI power on.
Changes in v8:
- Mark suspend/resume as static as per patches robot.
Changes in v7:
- Rebase atop commit afdd34c5fa40 ("HID: i2c-hid: show the error ...")
Changes in v6:
- ACPI probe function should have been "static"
- Don't export suspend/resume, just export dev_pm_ops from core.
- Fixed crash in ACPI module (missing init of "client")
- No need for regulator include in the core.
- Removed i2c_device_id table from ACPI module.
- Suspend/resume are no longer exported from the core.
Changes in v5:
- Add shutdown_tail op and use it in ACPI.
- Added mention of i2c-hid in the yaml itself as per Rob.
- Adjusted subject as per Rob.
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.
Changes in v4:
- ("arm64: defconfig: Update config names for i2c-hid rejigger") new for v4.
- Fully rejigger so ACPI and OF are full subclasses.
- Totally redid based on the new subclass system.
Changes in v3:
- Fixed compatible in example.
- Removed Benjamin as a maintainer.
- Rework to use subclassing.
- Updated description.
Changes in v2:
- ("dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P") new in v2.
- Get timings based on the compatible string.
- Use a separate compatible string for this new touchscreen.
Douglas Anderson (4):
HID: i2c-hid: Reorganize so ACPI and OF are separate modules
arm64: defconfig: Update config names for i2c-hid rejigger
dt-bindings: input: HID: i2c-hid: Introduce bindings for the Goodix
GT7375P
HID: i2c-hid: Introduce goodix-i2c-hid using i2c-hid core
.../bindings/input/goodix,gt7375p.yaml | 65 +++++
arch/arm64/configs/defconfig | 3 +-
drivers/hid/Makefile | 2 +-
drivers/hid/i2c-hid/Kconfig | 47 +++-
drivers/hid/i2c-hid/Makefile | 6 +-
drivers/hid/i2c-hid/i2c-hid-acpi.c | 143 ++++++++++
drivers/hid/i2c-hid/i2c-hid-core.c | 252 +++---------------
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 116 ++++++++
drivers/hid/i2c-hid/i2c-hid-of.c | 143 ++++++++++
drivers/hid/i2c-hid/i2c-hid.h | 22 ++
include/linux/platform_data/i2c-hid.h | 41 ---
11 files changed, 578 insertions(+), 262 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-of-goodix.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-of.c
delete mode 100644 include/linux/platform_data/i2c-hid.h
--
2.30.0.284.gd98b1dd5eaa7-goog
This adds new bindings for the Goodix GT7375P touchscreen. While this
touchscreen's communications are based on the generic "i2c-over-hid"
protocol, it needs special power sequencing and thus gets its own
compatible and bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
(no changes since v5)
Changes in v5:
- Added mention of i2c-hid in the yaml itself as per Rob.
- Adjusted subject as per Rob.
Changes in v3:
- Fixed compatible in example.
- Removed Benjamin as a maintainer.
- Updated description.
Changes in v2:
- ("dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P") new in v2.
.../bindings/input/goodix,gt7375p.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
new file mode 100644
index 000000000000..fe1c5016f7f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7375P touchscreen
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description:
+ Supports the Goodix GT7375P touchscreen.
+ This touchscreen uses the i2c-hid protocol but has some non-standard
+ power sequencing required.
+
+properties:
+ compatible:
+ items:
+ - const: goodix,gt7375p
+
+ reg:
+ enum:
+ - 0x5d
+ - 0x14
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ true
+
+ vdd-supply:
+ description: The 3.3V supply to the touchscreen.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&pp3300_ts>;
+ };
+ };--
2.30.0.284.gd98b1dd5eaa7-goog
On Fri, Jan 15, 2021 at 6:07 PM Douglas Anderson [off-list ref] wrote:
The goal of this series is to support the Goodix GT7375P touchscreen.
This touchscreen is special because it has power sequencing
requirements that necessitate driving a reset GPIO.
To do this, we totally rejigger the way i2c-hid is organized so that
it's easier to jam the Goodix support in there.
This series was:
- Tested on a device that uses normal i2c-hid.
- Tested on a device that has a Goodix i2c-hid device.
- Tested on an ACPI device, but an earlier version of the series.
I believe the plan is for Benjamin to land the whole series. Will
said this about the arm64 defconfig change (and provided his Ack):
quoted
...there are a few things I really care about
in defconfig (e.g. things like page size!), generally speaking we don't
need to Ack everything that changes in there.
That said, might be worth checking whether arm-soc have any defconfig
changes queued in -next so you don't end up with conflicts.
Changes in v9:
- 120 ms delay => 180 ms delay
- Local variable in ACPI code "ihid_of" => "ihid_acpi".
- Squash Benjamin's change for ACPI power on.
Changes in v8:
- Mark suspend/resume as static as per patches robot.
Changes in v7:
- Rebase atop commit afdd34c5fa40 ("HID: i2c-hid: show the error ...")
Changes in v6:
- ACPI probe function should have been "static"
- Don't export suspend/resume, just export dev_pm_ops from core.
- Fixed crash in ACPI module (missing init of "client")
- No need for regulator include in the core.
- Removed i2c_device_id table from ACPI module.
- Suspend/resume are no longer exported from the core.
Changes in v5:
- Add shutdown_tail op and use it in ACPI.
- Added mention of i2c-hid in the yaml itself as per Rob.
- Adjusted subject as per Rob.
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.
Changes in v4:
- ("arm64: defconfig: Update config names for i2c-hid rejigger") new for v4.
- Fully rejigger so ACPI and OF are full subclasses.
- Totally redid based on the new subclass system.
Changes in v3:
- Fixed compatible in example.
- Removed Benjamin as a maintainer.
- Rework to use subclassing.
- Updated description.
Changes in v2:
- ("dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P") new in v2.
- Get timings based on the compatible string.
- Use a separate compatible string for this new touchscreen.
Douglas Anderson (4):
HID: i2c-hid: Reorganize so ACPI and OF are separate modules
arm64: defconfig: Update config names for i2c-hid rejigger
dt-bindings: input: HID: i2c-hid: Introduce bindings for the Goodix
GT7375P
HID: i2c-hid: Introduce goodix-i2c-hid using i2c-hid core
.../bindings/input/goodix,gt7375p.yaml | 65 +++++
arch/arm64/configs/defconfig | 3 +-
drivers/hid/Makefile | 2 +-
drivers/hid/i2c-hid/Kconfig | 47 +++-
drivers/hid/i2c-hid/Makefile | 6 +-
drivers/hid/i2c-hid/i2c-hid-acpi.c | 143 ++++++++++
drivers/hid/i2c-hid/i2c-hid-core.c | 252 +++---------------
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 116 ++++++++
drivers/hid/i2c-hid/i2c-hid-of.c | 143 ++++++++++
drivers/hid/i2c-hid/i2c-hid.h | 22 ++
include/linux/platform_data/i2c-hid.h | 41 ---
11 files changed, 578 insertions(+), 262 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-of-goodix.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-of.c
delete mode 100644 include/linux/platform_data/i2c-hid.h
Many thanks for the wait. I have now scheduled this series in for-5.12/i2c-hid.
Cheers,
Benjamin