[PATCH v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies

Subsystems: drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, open firmware and flattened device tree bindings, the rest

STALE1984d REVIEWED: 7 (7M)

1 review trailer (1 from subsystem maintainers).

3 messages, 2 authors, 2021-02-23 · open the first message on its own page

[PATCH v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies

From: Hsin-Yi Wang <hidden>
Date: 2021-01-15 07:03:58

anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 60585a4fc22b..3ae97d9523e5 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -34,6 +34,15 @@ properties:
     description: used for reset chip control, RESET_N pin B7.
     maxItems: 1
 
+  vdd10-supply:
+    description: Regulator that provides the supply 1.0V power.
+
+  vdd18-supply:
+    description: Regulator that provides the supply 1.8V power.
+
+  vdd33-supply:
+    description: Regulator that provides the supply 3.3V power.
+
   ports:
     type: object
 
@@ -55,6 +64,9 @@ properties:
 required:
   - compatible
   - reg
+  - vdd10-supply
+  - vdd18-supply
+  - vdd33-supply
   - ports
 
 additionalProperties: false
@@ -72,6 +84,9 @@ examples:
             reg = <0x58>;
             enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
             reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+            vdd10-supply = <&pp1000_mipibrdg>;
+            vdd18-supply = <&pp1800_mipibrdg>;
+            vdd33-supply = <&pp3300_mipibrdg>;
 
             ports {
                 #address-cells = <1>;
-- 
2.30.0.284.gd98b1dd5eaa7-goog

[PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off

From: Hsin-Yi Wang <hidden>
Date: 2021-01-15 07:03:58

When suspending the driver, anx7625_power_standby() will be called to
turn off reset-gpios and enable-gpios. However, power supplies are not
disabled. To save power, the driver can get the power supply regulators
and turn off them in anx7625_power_standby().

Signed-off-by: Hsin-Yi Wang <redacted>
---
Change:
v3: add delays between regulators power on
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++
 drivers/gpu/drm/bridge/analogix/anx7625.h |  1 +
 2 files changed, 35 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 65cc05982f82..23283ba0c4f9 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
@@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
 static void anx7625_power_on(struct anx7625_data *ctx)
 {
 	struct device *dev = &ctx->client->dev;
+	int ret, i;
 
 	if (!ctx->pdata.low_power_mode) {
 		DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
 		return;
 	}
 
+	for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
+		ret = regulator_enable(ctx->pdata.supplies[i].consumer);
+		if (ret < 0) {
+			DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
+					     i, ret);
+			goto reg_err;
+		}
+		usleep_range(2000, 2100);
+	}
+
+	usleep_range(4000, 4100);
+
 	/* Power on pin enable */
 	gpiod_set_value(ctx->pdata.gpio_p_on, 1);
 	usleep_range(10000, 11000);
@@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx)
 	usleep_range(10000, 11000);
 
 	DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
+	return;
+reg_err:
+	for (--i; i >= 0; i--)
+		regulator_disable(ctx->pdata.supplies[i].consumer);
 }
 
 static void anx7625_power_standby(struct anx7625_data *ctx)
 {
 	struct device *dev = &ctx->client->dev;
+	int ret;
 
 	if (!ctx->pdata.low_power_mode) {
 		DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
@@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
 	usleep_range(1000, 1100);
 	gpiod_set_value(ctx->pdata.gpio_p_on, 0);
 	usleep_range(1000, 1100);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
+				     ctx->pdata.supplies);
+	if (ret < 0)
+		DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
+
 	DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
 }
 
@@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
 	platform->client = client;
 	i2c_set_clientdata(client, platform);
 
+	pdata->supplies[0].supply = "vdd10";
+	pdata->supplies[1].supply = "vdd18";
+	pdata->supplies[2].supply = "vdd33";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
+				      pdata->supplies);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
+		return ret;
+	}
 	anx7625_init_gpio(platform);
 
 	atomic_set(&platform->power_status, 0);
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 193ad86c5450..e4a086b3a3d7 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -350,6 +350,7 @@ struct s_edid_data {
 struct anx7625_platform_data {
 	struct gpio_desc *gpio_p_on;
 	struct gpio_desc *gpio_reset;
+	struct regulator_bulk_data supplies[3];
 	struct drm_bridge *panel_bridge;
 	int intp_irq;
 	u32 low_power_mode;
-- 
2.30.0.284.gd98b1dd5eaa7-goog

Re: [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off

From: Robert Foss <hidden>
Date: 2021-02-23 15:24:27

Hey Hsin-Yi,

This patch looks good to me, feel free to add my r-b.
Reviewed-by: Robert Foss <redacted>

On Fri, 15 Jan 2021 at 08:05, Hsin-Yi Wang [off-list ref] wrote:
quoted hunk
When suspending the driver, anx7625_power_standby() will be called to
turn off reset-gpios and enable-gpios. However, power supplies are not
disabled. To save power, the driver can get the power supply regulators
and turn off them in anx7625_power_standby().

Signed-off-by: Hsin-Yi Wang <redacted>
---
Change:
v3: add delays between regulators power on
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++
 drivers/gpu/drm/bridge/analogix/anx7625.h |  1 +
 2 files changed, 35 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 65cc05982f82..23283ba0c4f9 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
@@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
 static void anx7625_power_on(struct anx7625_data *ctx)
 {
        struct device *dev = &ctx->client->dev;
+       int ret, i;

        if (!ctx->pdata.low_power_mode) {
                DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
                return;
        }

+       for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
+               ret = regulator_enable(ctx->pdata.supplies[i].consumer);
+               if (ret < 0) {
+                       DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
+                                            i, ret);
+                       goto reg_err;
+               }
+               usleep_range(2000, 2100);
+       }
+
+       usleep_range(4000, 4100);
+
        /* Power on pin enable */
        gpiod_set_value(ctx->pdata.gpio_p_on, 1);
        usleep_range(10000, 11000);
@@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx)
        usleep_range(10000, 11000);

        DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
+       return;
+reg_err:
+       for (--i; i >= 0; i--)
+               regulator_disable(ctx->pdata.supplies[i].consumer);
 }

 static void anx7625_power_standby(struct anx7625_data *ctx)
 {
        struct device *dev = &ctx->client->dev;
+       int ret;

        if (!ctx->pdata.low_power_mode) {
                DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
@@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
        usleep_range(1000, 1100);
        gpiod_set_value(ctx->pdata.gpio_p_on, 0);
        usleep_range(1000, 1100);
+
+       ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
+                                    ctx->pdata.supplies);
+       if (ret < 0)
+               DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
+
        DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
 }
@@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
        platform->client = client;
        i2c_set_clientdata(client, platform);

+       pdata->supplies[0].supply = "vdd10";
+       pdata->supplies[1].supply = "vdd18";
+       pdata->supplies[2].supply = "vdd33";
+       ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
+                                     pdata->supplies);
+       if (ret) {
+               DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
+               return ret;
+       }
        anx7625_init_gpio(platform);

        atomic_set(&platform->power_status, 0);
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 193ad86c5450..e4a086b3a3d7 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -350,6 +350,7 @@ struct s_edid_data {
 struct anx7625_platform_data {
        struct gpio_desc *gpio_p_on;
        struct gpio_desc *gpio_reset;
+       struct regulator_bulk_data supplies[3];
        struct drm_bridge *panel_bridge;
        int intp_irq;
        u32 low_power_mode;
--
2.30.0.284.gd98b1dd5eaa7-goog
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help