[PATCH] arm64: dts: qcom: fix serial output for sm8250-hdk
flat view
DORMANTno replies
LANDED
From: Jonathan Marek <hidden>
Date: 2020-11-23 14:39:32
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Landed in mainline as 2802821a66f9 on 2020-11-24.
The uart2 node has been renamed, apply the change to sm8250-hdk dts too so
that serial output works.
Fixes: 91ed0e90fc49 ("arm64: dts: qcom: add sm8250 hdk dts")
Signed-off-by: Jonathan Marek <redacted>
---
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index b5026e422aa6..c3a2c5aa6fe9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts@@ -17,7 +17,7 @@ / { compatible = "qcom,sm8250-hdk", "qcom,sm8250"; aliases { - serial0 = &uart2; + serial0 = &uart12; }; chosen {
@@ -387,7 +387,7 @@ &tlmm { gpio-reserved-ranges = <28 4>, <40 4>; }; -&uart2 { +&uart12 { status = "okay"; };
--
2.26.1