[PATCH] dt-bindings: arm: Extend SCMI to support new reset protocol
From: Sudeep Holla <hidden>
Date: 2019-08-09 14:40:36
Also in:
lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
SCMIv2.0 adds a new Reset Management Protocol to manage various reset states a given device or domain can enter. Extend the existing SCMI bindings to add reset protocol support by re-using the reset bindings for both reset providers and consumers. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Sudeep Holla <redacted> --- .../devicetree/bindings/arm/arm,scmi.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) Hi Rob, I am posting this separately to avoid reposting the driver patches that are already reviewed/asked. I need your ack to take the changes for v5.4 I might have messed up something that it got missed from your patchworks Full series @[1] Regards, Sudeep [1] https://lore.kernel.org/lkml/20190806170208.6787-4-sudeep.holla@arm.com/ (local)
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index 317a2fc3667a..083dbf96ee00 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt@@ -73,6 +73,16 @@ SCMI provides an API to access the various sensors on the SoC. as used by the firmware. Refer to platform details for your implementation for the IDs to use. +Reset signal bindings for the reset domains based on SCMI Message Protocol +------------------------------------------------------------ + +This binding for the SCMI reset domain providers uses the generic reset +signal binding[5]. + +Required properties: + - #reset-cells : Should be 1. Contains the reset domain ID value used + by SCMI commands. + SRAM and Shared Memory for SCMI -------------------------------
@@ -93,6 +103,7 @@ Each sub-node represents the reserved area for SCMI. [2] Documentation/devicetree/bindings/power/power_domain.txt [3] Documentation/devicetree/bindings/thermal/thermal.txt [4] Documentation/devicetree/bindings/sram/sram.txt +[5] Documentation/devicetree/bindings/reset/reset.txt Example:
@@ -152,6 +163,11 @@ firmware { reg = <0x15>; #thermal-sensor-cells = <1>; }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; }; };
@@ -166,6 +182,7 @@ hdlcd@7ff60000 { reg = <0 0x7ff60000 0 0x1000>; clocks = <&scmi_clk 4>; power-domains = <&scmi_devpd 1>; + resets = <&scmi_reset 10>; }; thermal-zones { --
2.17.1