Re: [PATCH 3/8] bindings: PCI: designware: Add support for the EP in designware driver
From: Rob Herring <robh@kernel.org>
Date: 2018-04-09 19:12:37
Also in:
linux-pci, lkml
On Wed, Mar 28, 2018 at 12:38:33PM +0100, Gustavo Pimentel wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Gustavo Pimentel <redacted> --- Documentation/devicetree/bindings/pci/designware-pcie.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+)diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 6300762..4bb2e08 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt@@ -3,6 +3,7 @@ Required properties: - compatible: "snps,dw-pcie" for RC mode; + "snps,dw-pcie-ep" for EP mode; - reg: Should contain the configuration address space. - reg-names: Must be "config" for the PCIe configuration space. (The old way of getting the configuration address space from "ranges"@@ -56,3 +57,15 @@ Example configuration: #interrupt-cells = <1>; num-lanes = <1>; }; +or + pcie_ep: pcie_ep@dfc00000 {
pcie-ep@... Or what others have used. We should define a standard name in the DT spec for this.
+ compatible = "snps,dw-pcie-ep"; + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ + <0xdfc01000 0x0001000>, /* IP registers 2 */ + <0xd0000000 0x2000000>; /* Configuration space */ + reg-names = "dbi", "dbi2", "addr_space"; + device_type = "pci"; + num-ib-windows = <6>; + num-ob-windows = <2>; + num-lanes = <1>; + }; -- 2.7.4