[git:media_tree/master] media: dt-bindings: media: Binding document for Qualcomm Camera subsystem driver
From: Mauro Carvalho Chehab <hidden>
Date: 2017-08-26 18:47:48
Subsystem:
arm/qualcomm mailing list, media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, qualcomm camera subsystem driver, qualcomm media platform, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue, Bryan O'Donoghue, Linus Torvalds
This is an automatic generated email to let you know that the following patch were queued: Subject: media: dt-bindings: media: Binding document for Qualcomm Camera subsystem driver Author: Todor Tomov [off-list ref] Date: Tue Aug 8 09:29:59 2017 -0400 Add DT binding document for Qualcomm Camera subsystem driver. CC: Rob Herring <robh+dt@kernel.org> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <redacted> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <redacted> Signed-off-by: Mauro Carvalho Chehab <redacted> .../devicetree/bindings/media/qcom,camss.txt | 197 +++++++++++++++++++++ 1 file changed, 197 insertions(+) ---
diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
new file mode 100644
index 000000000000..cadecebc73f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,camss.txt@@ -0,0 +1,197 @@ +Qualcomm Camera Subsystem + +* Properties + +- compatible: + Usage: required + Value type: <stringlist> + Definition: Should contain: + - "qcom,msm8916-camss" +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: Register ranges as listed in the reg-names property. +- reg-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "csiphy0" + - "csiphy0_clk_mux" + - "csiphy1" + - "csiphy1_clk_mux" + - "csid0" + - "csid1" + - "ispif" + - "csi_clk_mux" + - "vfe0" +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: Interrupts as listed in the interrupt-names property. +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "csiphy0" + - "csiphy1" + - "csid0" + - "csid1" + - "ispif" + - "vfe0" +- power-domains: + Usage: required + Value type: <prop-encoded-array> + Definition: A phandle and power domain specifier pairs to the + power domain which is responsible for collapsing + and restoring power to the peripheral. +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and clock specifier pairs as listed + in clock-names property. +- clock-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "camss_top_ahb" + - "ispif_ahb" + - "csiphy0_timer" + - "csiphy1_timer" + - "csi0_ahb" + - "csi0" + - "csi0_phy" + - "csi0_pix" + - "csi0_rdi" + - "csi1_ahb" + - "csi1" + - "csi1_phy" + - "csi1_pix" + - "csi1_rdi" + - "camss_ahb" + - "camss_vfe_vfe" + - "camss_csi_vfe" + - "iface" + - "bus" +- vdda-supply: + Usage: required + Value type: <phandle> + Definition: A phandle to voltage supply for CSI2. +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + +* Nodes + +- ports: + Usage: required + Definition: As described in video-interfaces.txt in same directory. + Properties: + - reg: + Usage: required + Value type: <u32> + Definition: Selects CSI2 PHY interface - PHY0 or PHY1. + Endpoint node properties: + - clock-lanes: + Usage: required + Value type: <u32> + Definition: The physical clock lane index. The value + must always be <1> as the physical clock + lane is lane 1. + - data-lanes: + Usage: required + Value type: <prop-encoded-array> + Definition: An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. + +* An Example + + camss: camss@1b00000 { + compatible = "qcom,msm8916-camss"; + reg = <0x1b0ac00 0x200>, + <0x1b00030 0x4>, + <0x1b0b000 0x200>, + <0x1b00038 0x4>, + <0x1b08000 0x100>, + <0x1b08400 0x100>, + <0x1b0a000 0x500>, + <0x1b00020 0x10>, + <0x1b10000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + interrupts = <GIC_SPI 78 0>, + <GIC_SPI 79 0>, + <GIC_SPI 51 0>, + <GIC_SPI 52 0>, + <GIC_SPI 55 0>, + <GIC_SPI 57 0>; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + power-domains = <&gcc VFE_GDSC>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + clock-names = "camss_top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "camss_ahb", + "camss_vfe_vfe", + "camss_csi_vfe", + "iface", + "bus"; + vdda-supply = <&pm8916_l2>; + iommus = <&apps_iommu 3>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + }; + };
_______________________________________________ linuxtv-commits mailing list linuxtv-commits@linuxtv.org https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits