The bindings for the V3 Semiconductor PCI bridge are a tad bit outdated
and predates the more formal format we have adopted for the bindings.
Update them a bit so it is easier to read, and add the Integrator AP-
specific compatible so we can detect that we are running on that specific
platform.
Signed-off-by: Linus Walleij <redacted>
---
.../devicetree/bindings/pci/v3-v360epc-pci.txt | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
index 30b364e504ba..bcc5fe2a74cb 100644
--- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -2,14 +2,15 @@ V3 Semiconductor V360 EPC PCI bridge
This bridge is found in the ARM Integrator/AP (Application Platform)
-Integrator-specific notes:
-
-- syscon: should contain a link to the syscon device node (since
- on the Integrator, some registers in the syscon are required to
- operate the V3).
-
-V360 EPC specific notes:
-
-- reg: should contain the base address of the V3 adapter.
+Required properties:
+- compatible: should be one of:
+ "v3,v360epc-pci"
+ "arm,integrator-ap-pci", "v3,v360epc-pci"
+- reg: should contain the base address of the V3 host bridge.
- interrupts: should contain a reference to the V3 error interrupt
as routed on the system.
+
+Integrator-specific required properties:
+- syscon: should contain a link to the syscon device node, since
+ on the Integrator, some registers in the syscon are required to
+ operate the V3 host bridge.
--
2.9.4