[PATCH 0/3] ARM: dts: omap: workarounds for Ethernet PHY strap on DRA71 and DRA72 EVMs

Hi Tony,

Here are some patches to overcome incorrect Ethernet PHY strap settings
on DRA72x EVM Rev C and DRA71 EVM. Both of these boards use TI's DP83867
PHY.

The incorrect PHY strap settings cause a voilation of PHY specification
and need to be worked around in software as documented in the commit
messages. But there is no known issue that these patches fix.

I did verify that there are no regressions with NFS boot on these boards
after the patches are applied on v4.12-rc4.

The series itself has been rebased on your omap-for-v4.13/dt branch since
it has some conflicts with patches you have queued.

Sekhar Nori (3):
  ARM: dts: dra71-evm: workaround incorrect DP83867 RX_CTRL pin strap
  ARM: dts: dra72-evm-revc: workaround incorrect DP83867 RX_CTRL pin
    strap
  ARM: omap2plus_defconfig: enable DP83867 phy driver

 arch/arm/boot/dts/dra71-evm.dts      | 2 ++
 arch/arm/boot/dts/dra72-evm-revc.dts | 2 ++
 arch/arm/configs/omap2plus_defconfig | 1 +
 3 files changed, 5 insertions(+)

-- 
2.9.0