[PATCH 2/3] clk: qcom: Elaborate on "active" clocks in the RPM clock bindings
From: Linus Walleij <hidden>
Date: 2017-03-22 08:18:42
Also in:
linux-arm-msm, linux-clk
Subsystem:
arm/qualcomm mailing list, common clk framework, open firmware and flattened device tree bindings, qualcomm clock drivers, the rest · Maintainers:
Stephen Boyd, Brian Masney, Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson, Linus Torvalds
The concept of "active" clocks is just explained in a bried comment in the device driver, let's explain it a bit more in the device tree bindings so everyone understands this. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <redacted> --- Documentation/devicetree/bindings/clock/qcom,rpmcc.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index d470a0187035..cf80a00b7ff2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt@@ -18,6 +18,14 @@ Required properties : - #clock-cells : shall contain 1 +The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> +and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock +is an "active" clock, which means that the consumer only care that the +clock is available when the system is active, i.e. not suspended. If +it is important that the clock keeps running during system suspend, +you need to specify the non-active clock, the one not containing +*_A_* in the enumerator name. + Example: smd { compatible = "qcom,smd";
--
2.9.3