Hi Rob,

since serdev has been merged, i'm currently working on a
suitable ethernet driver for the QCA7000 [1]. In order to provide a plug
and play solution for the network interface i suggest the following
binding, which uses common properties for UART configuration:

* Qualcomm QCA7000 (Ethernet over UART protocol)

Note: The QCA7000 is also useable as a UART slave device.

Required properties:
- compatible        : Should be "qca,qca7000-uart"

Optional properties:
- local-mac-address : 6 bytes, Specifies MAC address
- current-speed     : Specifies current serial device speed in
                      bits per second (default = 115200)
- data-bits         : Specifies number of data bits (default = 8)
- use-parity        : If present, this enables the parity
                      error detection (default = off)
- odd-parity        : If present, this specifies that the parity
                      of each character must be odd (default = even)

Example:

/* Freescale i.MX28 UART */
auart0: serial@8006a000 {
    compatible = "fsl,imx28-auart", "fsl,imx23-auart";
    reg = <0x8006a000 0x2000>;
    pinctrl-names = "default";
    pinctrl-0 = <&auart0_2pins_a>;
    status = "okay";

    qca7000: ethernet {
        compatible = "qca,qca7000-uart";
        local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
        current-speed = <38400>;
        data-bits = <8>;
        use-parity;
        odd-parity;
    };
};

Is it okay for you or do you want a different kind of configuration?
Are there any plans for parity handling?

Thanks
Stefan

P.S.: Sorry for the broken version

[1] - https://lwn.net/Articles/701225/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html