Re: [PATCH 2/2 v3] dt-bindings: display: imx: entry for AUS mode
From: Rob Herring <hidden>
Date: 2017-03-15 20:24:28
Also in:
linux-fbdev, lkml
On Wed, Mar 08, 2017 at 07:22:56PM +0100, Martin Kaiser wrote:
quoted hunk ↗ jump to hunk
Allow setting the AUS mode for a display from the device tree. Use an optional boolean property. AUS mode can be set only on imx21 and compatible chipsets. Signed-off-by: Martin Kaiser <martin-XxZfDwE/svGeZLLa646FqQ@public.gmane.org> --- v3: use a boolean DT property instead of the register value separate patches for DT binding and code changes v2: re-sending DT bindings and code changes as one patch Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ 1 file changed, 2 insertions(+)diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 7a5c0e2..cacae0e 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt@@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus_mode: boolean to enable AUS mode (only for imx21)
fsl,aus-mode With that, Acked-by: Rob Herring <redacted> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html