[PATCH v2 1/7] clk: tegra: fix pll_a1 iddq register, add pll_a1
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: 2017-02-23 10:51:18
Also in:
linux-clk, linux-tegra, lkml
Subsystem:
common clk framework, tegra clock driver, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Peter De Schrijver, Prashant Gaikwad, Linus Torvalds
pll_a1 was using CLK_RST_CONTROLLER_PLLA1_MISC_0 for IDDQ control rather than the correct register CLK_RST_CONTROLLER_PLLA1_MISC_1. Also add pll_a1 to the set of clocks defined for Tegra210. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> --- drivers/clk/tegra/clk-tegra210.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 2896d2e..2ef8d49 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c@@ -1772,7 +1772,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv) .misc_reg = PLLA1_MISC0, .lock_mask = PLLCX_BASE_LOCK, .lock_delay = 300, - .iddq_reg = PLLA1_MISC0, + .iddq_reg = PLLA1_MISC1, .iddq_bit_idx = PLLCX_IDDQ_BIT, .reset_reg = PLLA1_MISC0, .reset_bit_idx = PLLCX_RESET_BIT,
@@ -2209,6 +2209,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv) [tegra_clk_pll_c4_out2] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT2, .present = true }, [tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true }, [tegra_clk_apb2ape] = { .dt_id = TEGRA210_CLK_APB2APE, .present = true }, + [tegra_clk_pll_a1] = { .dt_id = TEGRA210_CLK_PLL_A1, .present = true }, }; static struct tegra_devclk devclks[] __initdata = {
--
1.9.1