[PATCH V5 1/3] dt-bindings: document common IEEE 802.11 frequency limit property

From: Rafał Miłecki <redacted>

This new file should be used for properties that apply to all wireless
devices.

Signed-off-by: Rafał Miłecki <redacted>
---
V2: Switch to a single ieee80211-freq-limit property that allows specifying
    *multiple* ranges. This resolves problem with more complex rules as pointed
    by Felx.
    Make description implementation agnostic as pointed by Arend.
    Rename node to wifi as suggested by Martin.
V3: Use more real-life frequencies in the example.
V5: Describe hardware design as possible use for this property
---
 .../devicetree/bindings/net/wireless/ieee80211.txt   | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ieee80211.txt

diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
new file mode 100644
index 0000000..1c82c16
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt

@@ -0,0 +1,20 @@
+Common IEEE 802.11 properties
+
+This provides documentation of common properties that are valid for all wireless
+devices.
+
+Optional properties:
+ - ieee80211-freq-limit : list of supported frequency ranges in KHz. This can be
+	used to specify extra hardware limitations caused by e.g. used antennas
+	or power amplifiers.
+
+Example:
+
+pcie@0,0 {
+	reg = <0x0000 0 0 0 0>;
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <2402000 2482000>,
+				       <5170000 5250000>;
+	};
+};

-- 
2.10.1