Thread (9 messages) 9 messages, 2 authors, 2016-10-01

Re: [PATCH RFC v2 0/12] Add R8A7743/SK-RZG1M board support

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2016-10-01 11:29:48
Also in: linux-arm-kernel, linux-renesas-soc

Hi Sergei,

On Fri, Sep 30, 2016 at 12:14 AM, Sergei Shtylyov
[off-list ref] wrote:
   Here's the set of 12 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20160926-v4.8-rc8' tag. I'm adding the device tree support for
the R8A7743-based SK-RZG1M board. The SoC is close to R8A7791 and the board
seems  identical to the R8A7791/Porter board. This version includes the Ether,
so the board should boot with NFS root now. I tried to address all the comments
to the version 1 (except the need to use the new CPG/MSSR drivers -- this one
will be addressed RSN). The DMAC/SCIF/IRQC bindings patches posted recently are
There's an (old) version of an r8a7791 CPG/MSSR driver at
https://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/cpg-mssr-v4

To handle it cleanly, this is going to need "[PATCH/RFC v3 00/22] soc:
renesas: Add R-Car RST driver for obtaining mode pin state"...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help