# Re: \[PATCH 08/10\] leds: Add binding for Juniper's I2CS FPGA

- From: Jacek Anaszewski \<hidden\>
- Date: 2016-10-10 09:41:59 
- List: linux-devicetree
- Page: https://ratatoskr.run/linux-devicetree/2016/10/4850868
- Thread: https://ratatoskr.run/linux-devicetree/2016/10/4849927/t.md

```text
Hi Pantelis,

On 10/07/2016 05:21 PM, Pantelis Antoniou wrote:
> From: Georgi Vlaev <redacted>
>
> Document bindings for the I2CS FPGA leds.
>
> Signed-off-by: Georgi Vlaev <redacted>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <redacted>
> ---
>  .../devicetree/bindings/leds/leds-i2cs.txt         | 34 ++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-i2cs.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-i2cs.txt b/Documentation/devicetree/bindings/leds/leds-i2cs.txt
> new file mode 100644
> index 0000000..100e584
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-i2cs.txt
> @@ -0,0 +1,34 @@
> +Juniper I2CS LED driver.
> +
> +This is present in Juniper platforms that use a I2CS Slave FPGA.
> +
> +Required properties:
> +  - compatible: must be "jnx,leds-i2cs"

s/compatible:/compatible :/

Also treat the description as a regular sentence, i.e. begin it
with a capital letter and put a dot at the end.

> +  - #address-cells : must be 1.
> +  - #size-cells : must be 0.

s/must/Must/

> +Each led is represented as a sub-node of the jnx,leds-i2cs device.
> +
> +LED sub-node properties:
> +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
> +- reg : number of LED
> +- linux,default-trigger : (optional)
> +   see Documentation/devicetree/bindings/leds/common.txt

Driver uses also "hw-blink" property. Please document it here, but
add also a prefix:

jnx,hw-blink

Also "jnx" entry should be added to Documentation/devicetree/bindings/vendor-prefixes.txt.

> +Example:
> +
> +leds_fpc0: leds-jnx-i2cs {
> +	compatible = "jnx,leds-i2cs";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	fpc0-fail {
> +		reg = <1>;

It would be good to provide also an example of "label"
property to suggest LED class device name according to
the LED class device naming convention.
See Documentation/leds/leds-class.txt for details.

> +		linux,default-trigger = "fpc0-fail";
> +	};
> +
> +	fpc0-ok {
> +		reg = <2>;
> +		linux,default-trigger = "fpc0-ok";
> +	};
> +};
>


-- 
Best regards,
Jacek Anaszewski
```
