# Re: \[PATCH 1/3\] dt-bindings: drm/bridge: adv7511: Add regulators for ADV7533

- From: Archit Taneja \<hidden\>
- Date: 2016-09-06 04:22:40 
- List: linux-devicetree
- Page: https://ratatoskr.run/linux-devicetree/2016/09/8127716
- Thread: https://ratatoskr.run/linux-arm-msm/2016/08/8127383/t.md

```text


On 09/02/2016 09:26 PM, Rob Herring wrote:
> On Wed, Aug 31, 2016 at 04:22:08PM +0530, Archit Taneja wrote:
>> Add the regulator supply properties needed for ADV7533. The regulator
>> names are named after the pin names. The exact use of each supply isn't
>> clear from the data sheets.
>>
>> The regulators are specified as optional properties since there can
>> be boards which have a fixed supply directly routed to the pins, and
>> these may not be modelled as regulator supplies.
>>
>> There might be a similar set of regulators for ADV7511, but we don't
>> have the docs at the moment to find out what supplies it needs. The
>> regulator properties needed by ADV7511 can be updated as we get more
>> data on it.
>
> The ADV7510 is available and there's a pinout comparison with the 7511:
>
> http://www.analog.com/media/en/technical-documentation/evaluation-documentation/ADV7510_to_ADV7511_differences.pdf
>
> These 2 seem to have the same supplies...

Thanks. I'll use this.

>
>>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: <redacted>
>> Signed-off-by: Archit Taneja <redacted>
>> ---
>>   Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>> index 6532a59..669b6f2 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>> @@ -56,6 +56,12 @@ Optional properties:
>>   - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
>>     generator. The chip will rely on the sync signals in the DSI data lanes,
>>     rather than generate its own timings for HDMI output.
>> +- avdd-supply: Only for ADV7533. A 1.8V supply that powers up the AVDD, DVDD
>> +  PVDD and A2VDD pins on the chip.
>
> This sounds wrong. Each input to the chip should be a property even if
> they are typically from the same supply.

I'll create an entry for each.

>
> The 7511 has DVDD, AVDD, and PVDD.
>
>> +- v1p2-supply: Only for ADV7533. A supply that powers up the V1P2 pin on the
>> +  chip. Can be either 1.2V or 1.8V.
>
> This appears to be 7533 specific.
>
>> +- v3p3-supply: Only for ADV7533. A 3.3V supply that powers up the V3P3 pin on
>> +  the chip.
>
> DVDD_3V on 7511
>
> 7510/7511 also have BGVDD (for Bandgap). Not clear what the voltage is.

I'll add this regulator, and mention that we don't know
what the voltage is.

>
> Rob
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
```
