# \[PATCH v3 1/7\] mach-aspeed: Select pinctrl drivers - From: Andrew Jeffery \ - Date: 2016-08-30 07:56:30 - List: linux-devicetree - Page: https://ratatoskr.run/linux-devicetree/2016/08/4824560 - Thread: https://ratatoskr.run/linux-devicetree/2016/08/4824559/t.md ```text Signed-off-by: Andrew Jeffery --- arch/arm/mach-aspeed/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index 5225fbcb250d..f3f8c5c658db 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -5,6 +5,8 @@ menuconfig ARCH_ASPEED select WATCHDOG select ASPEED_WATCHDOG select MOXART_TIMER + select MFD_SYSCON + select PINCTRL help Say Y here if you want to run your kernel on an ASpeed BMC SoC. @@ -14,6 +16,7 @@ config MACH_ASPEED_G4 bool "Aspeed SoC 4th Generation" depends on ARCH_MULTI_V5 select CPU_ARM926T + select PINCTRL_ASPEED_G4 help Say yes if you intend to run on an Aspeed ast2400 or similar fourth generation BMCs, such as those used by OpenPower Power8 @@ -23,6 +26,7 @@ config MACH_ASPEED_G5 bool "Aspeed SoC 5th Generation" depends on ARCH_MULTI_V6 select CPU_V6 + select PINCTRL_ASPEED_G5 help Say yes if you intend to run on an Aspeed ast2500 or similar fifth generation Aspeed BMCs. -- 2.9.3.1.g0db844e ```