# \[PATCH v5 2/3\] documentation: Add secure monitor binding documentation

- From: Carlo Caione \<hidden\>
- Date: 2016-05-29 11:12:02 
- List: linux-devicetree
- Page: https://ratatoskr.run/linux-devicetree/2016/05/8123151
- Thread: https://ratatoskr.run/linux-amlogic/2016/05/8123151/t.md

```text
From: Carlo Caione <redacted>

Add the binding documentation for the Amlogic secure monitor driver.

Signed-off-by: Carlo Caione <redacted>
---
 .../bindings/firmware/meson/meson_sm.txt           | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt

diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..6f0b5bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,33 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+	firmware {
+		compatible = "simple-bus";
+
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
+
+Example of the node using the secure monitor:
+
+	#include <dt-bindings/firmware/meson-sm.h>
+
+	...
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		secure-monitor = <&sm>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		...
+	};
+
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
```
