Improve the description of properties "tx-burst-size-dword"
and "rx-burst-size-dword".
Signed-off-by: Peter Chen <redacted>
Cc: Lucas Stach <redacted>
Cc: Shanw Guo <redacted>
---
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 27dc705..781296b 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -37,11 +37,15 @@ Optional properties:
- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
(4 bytes), This register represents the maximum length of a the burst
in 32-bit words while moving data from system memory to the USB
- bus, changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+ bus, the value of this property will only take effect if property
+ "ahb-burst-config" is set to 0, if this property is missing the reset
+ default of the hardware implementation will be used.
- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
(4 bytes), This register represents the maximum length of a the burst
in 32-bit words while moving data from the USB bus to system memory,
- changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+ the value of this property will only take effect if property
+ "ahb-burst-config" is set to 0, if this property is missing the reset
+ default of the hardware implementation will be used.
- extcon: phandles to external connector devices. First phandle should point to
external connector, which provide "USB" cable events, the second should point
to external connector device, which provide "USB-HOST" cable events. If one
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html