DORMANTno replies REVIEWED: 6 (6M)

[PATCH] serial: sh-sci: Add device tree support for r8a7795

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: 2015-08-25 06:49:49
Also in: linux-serial, linux-sh, lkml
Subsystem: open firmware and flattened device tree bindings, the rest, tty layer and serial drivers · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Greg
Renesas r8a7795 initial SoC/board support patch-set depends on this patch.
Renesas SoC series maintainer is Simon and Magnus.
Simon can accept (?) this patch as part of Renesas new SoC if Greg
can give it Ack. Or Simon can merge/base your branch.
I'm not sure which one is good choice

 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index e84b13a..73f825e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -23,6 +23,8 @@ Required properties:
     - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART.
     - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART.
     - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
+    - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
+    - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
     - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
     - "renesas,scif" for generic SCIF compatible UART.
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help