Enable regulator for usbdrd3_0 and usbdrd3_1

From the schematic pin diagram USB3_0 and USB3_1

is regulated by LDO9 and LD011.

Fix the boot message of failed.
[    3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree
[    3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed
[    3.503568] usb@12000000 supply vdd33 not found, using dummy regulator
[    3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree
[    3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed
[    3.509181] usb@12000000 supply vdd10 not found, using dummy regulator
[    3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree
[    3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed
[    3.917578] usb@12400000 supply vdd33 not found, using dummy regulator
[    3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree
[    3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed

---
This patch is based on Krzysztof github branch work-next/odroid-xu3-s2mps11-irq
---

Signed-off-by: Anand Moon <redacted>
---
 arch/arm/boot/dts/exynos5422-odroidxu3.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 27014bb..a353a58 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts

@@ -513,3 +513,13 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "otg";
 };
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};

-- 
1.9.1