[resend PATCH 0/3] Add DRA7xx CPSW Ethernet support in Device Tree

Adding device tree entry for CPSW to make it work in Dual EMAC mode.

These patches were tested with DRA7 hwmod patches on top of linux-next.
The patches were already reviewed [1] and has been waiting for cross bar
and hwmod to be pulled in. Now since all dependent patches has already
pulled in, so reposting the patches again.

Patches are tested on linux-next, the boot logs on DRA7xx EVM [2]

[1] https://lkml.org/lkml/2014/5/13/89
[2] http://slexy.org/view/s2YqO0Wj9b 

Mugunthan V N (3):
  pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC
  arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx
  arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM

 arch/arm/boot/dts/dra7-evm.dts    | 107 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/dra7.dtsi       |  59 +++++++++++++++++++++
 include/dt-bindings/pinctrl/dra.h |   8 +++
 3 files changed, 174 insertions(+)

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html