[PATCH] dt-bindings: ata: create bindings for imx sata controller
From: Shawn Guo <hidden>
Date: 2014-06-24 07:44:37
Also in:
linux-ide
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Freescale i.MX SATA controller mostly conforms to the AHCI interface, but there are some special extensions at integration level like clocks settings and hardware parameters. Let's create a separate bindings doc for imx sata controller, so that more imx specific properties can be added later without messing up the generic ahci-platform bindings. Signed-off-by: Shawn Guo <redacted> --- .../devicetree/bindings/ata/ahci-platform.txt | 6 ----- Documentation/devicetree/bindings/ata/imx-sata.txt | 26 ++++++++++++++++++++++ 2 files changed, 26 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/imx-sata.txt
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index c96d8dcf98fd..549ceb8cb93b 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt@@ -6,8 +6,6 @@ Each SATA controller should have its own node. Required properties: - compatible : compatible string, one of: - "allwinner,sun4i-a10-ahci" - - "fsl,imx53-ahci" - - "fsl,imx6q-ahci" - "hisilicon,hisi-ahci" - "ibm,476gtr-ahci" - "marvell,armada-380-ahci"
@@ -22,10 +20,6 @@ Optional properties: - clocks : a list of phandle + clock specifier pairs - target-supply : regulator for SATA target power -"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties: -- clocks : must contain the sata, sata_ref and ahb clocks -- clock-names : must contain "ahb" for the ahb clock - Examples: sata@ffe08000 { compatible = "snps,spear-ahci";
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt
new file mode 100644
index 000000000000..aeb99dd986b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/imx-sata.txt@@ -0,0 +1,26 @@ +* Freescale i.MX AHCI SATA Controller + +The Freescale i.MX SATA controller mostly conforms to the AHCI interface +with some special extensions at integration level. + +Required properties: +- compatible : should be one of the following: + - "fsl,imx53-ahci" for i.MX53 SATA controller + - "fsl,imx6q-ahci" for i.MX6Q SATA controller +- interrupts : interrupt mapping for SATA IRQ +- reg : registers mapping +- clocks : list of clock specifiers, must contain an entry for each + required entry in clock-names +- clock-names : should include "sata", "sata_ref" and "ahb" entries + +Examples: + +sata@02200000 { + compatible = "fsl,imx6q-ahci"; + reg = <0x02200000 0x4000>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_SATA>, + <&clks IMX6QDL_CLK_SATA_REF_100M>, + <&clks IMX6QDL_CLK_AHB>; + clock-names = "sata", "sata_ref", "ahb"; +};
--
1.8.3.2