[PATCH v2 1/2] ASoC: cs4265: bindings: sound: Add binding for CS4265 CODEC.
From: Paul Handrigan <hidden>
Date: 2014-06-23 22:29:52
Also in:
alsa-devel
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
This patch adds binding documentation for the Cirrus Logic CS4265 I2C CODEC. Changes for v2: * Change DT reset pin name to "reset-gpios" Signed-off-by: Paul Handrigan <redacted> --- Documentation/devicetree/bindings/sound/cs4265.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs4265.txt
diff --git a/Documentation/devicetree/bindings/sound/cs4265.txt b/Documentation/devicetree/bindings/sound/cs4265.txt
new file mode 100644
index 0000000..380fff8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4265.txt@@ -0,0 +1,29 @@ +CS4265 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "cirrus,cs4265" + + - reg : the I2C address of the device for I2C. The I2C address depends on + the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. + If it is low, the i2c address is 0x4e. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + +Examples: + +codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ + compatible = "cirrus,cs4265"; + reg = <0x4f>; +}; + + +codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ + compatible = "cirrus,cs4265"; + reg = <0x4e>; +};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html