[PATCH] Documentation: remove gpio-samsung device tree bindings documentation
From: Beomho Seo <hidden>
Date: 2014-05-21 11:22:27
Also in:
linux-samsung-soc
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch remove gpio-samsung device tree bindings documentation. Already a pictrl driver used for exynos4 and 5. If want to know about gpio pin control(e.g. mux function, confiugration), refer to samsung-pinctrl device tree bindings documentation. Signed-off-by: Beomho Seo <redacted> --- .../devicetree/bindings/gpio/gpio-samsung.txt | 41 -------------------- 1 file changed, 41 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-samsung.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null@@ -1,41 +0,0 @@ -Samsung Exynos4 GPIO Controller - -Required properties: -- compatible: Compatible property value should be "samsung,exynos4-gpio>". - -- reg: Physical base address of the controller and length of memory mapped - region. - -- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes - should be the following with values derived from the SoC user manual. - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [mux function] - [flags and pull up/down] - [drive strength]> - - Values for gpio specifier: - - Pin number: is a value between 0 to 7. - - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled. - 1 - Pull Down Enabled. - 3 - Pull Up Enabled. - Bit 16 (0x00010000) - Input is active low. - - Drive Strength: 0 - 1x, - 1 - 3x, - 2 - 2x, - 3 - 4x - -- gpio-controller: Specifies that the node is a gpio controller. -- #address-cells: should be 1. -- #size-cells: should be 1. - -Example: - - gpa0: gpio-controller@11400000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - gpio-controller; - };
--
1.7.9.5