[PATCH 0/3] add support for the R-Car H2 and M2 xHCI controllers
From: Yoshihiro Shimoda <hidden>
Date: 2014-05-19 10:07:36
Also in:
linux-sh
This patch set adds the USB xHCI support for the R-Car H2 and M2 SoCs. These SoCs use an xHCI but still need specific initialization, mainly to setup the firmware downloading and the specific registers. This patch set depends on the following patches: http://marc.info/?l=linux-usb&m=140014937401793&w=2 http://marc.info/?l=linux-usb&m=140014935801786&w=2 http://marc.info/?l=linux-usb&m=140014933101775&w=2 http://marc.info/?l=linux-usb&m=140014932301770&w=2 However, this patch set doesn't depend on the following patch because this patch set uses the "USB phy", not "phy": http://marc.info/?l=linux-usb&m=140025742005303&w=2 Yoshihiro Shimoda (3): usb: host: xhci-plat: add xhci_plat_start() usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers Documentation: dt-bindings: update xhci-platform DT binding for R-Car Gen2 Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +- drivers/usb/host/Kconfig | 8 + drivers/usb/host/Makefile | 3 + drivers/usb/host/xhci-plat.c | 25 ++- drivers/usb/host/xhci-rcar.c | 187 ++++++++++++++++++++ drivers/usb/host/xhci-rcar.h | 37 ++++ 6 files changed, 261 insertions(+), 2 deletions(-) create mode 100644 drivers/usb/host/xhci-rcar.c create mode 100644 drivers/usb/host/xhci-rcar.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html