Update fsl-fec.txt to add 'clocks' and 'clock-names' properties.
Signed-off-by: Shawn Guo <redacted>
---
Changes since v1:
- Leave compatible change out, which should probably be addressed by
another patch
- Move clock properties into 'Optional properties:' section
Documentation/devicetree/bindings/net/fsl-fec.txt | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 845ff84..468736d 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -16,6 +16,15 @@ Optional properties:
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
- phy-supply: regulator that powers the Ethernet PHY.
+- clocks: the clocks feeding the FEC controller and phy.
+ - "ipg": the peripheral access clock
+ - "ahb": the bus clock for MAC
+ - "ptp": the sampling clock for PTP (IEEE 1588). On SoC like i.MX6Q,
+ the clock could come from either the internal clock control module
+ or external oscillator via pad depending on board design.
+ - "enet_out": the phy reference clock provided by SoC via pad, which
+ is available on SoC like i.MX28.
+- clock-names: Must contain the clock names described just above
Example:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html