[PATCH 1/2] ASoC: add DT binding document for MAX98090 CODEC
DORMANTno replies
From: Stephen Warren <hidden>
Date: 2013-12-04 22:19:26
Also in:
alsa-devel, linux-tegra
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
From: Stephen Warren <redacted> This binding mainly serves to document the list of input and output pins that may be used in a sound card's audio routing table. Signed-off-by: Stephen Warren <redacted> --- This series doesn't depend on anything; it could be applied anywhere in the ASoC tree. .../devicetree/bindings/sound/max98090.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98090.txt
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
new file mode 100644
index 000000000000..e4c8b36dcf89
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98090.txt@@ -0,0 +1,43 @@ +MAX98090 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "maxim,max98090". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Pins on the device (for linking into audio routes): + + * MIC1 + * MIC2 + * DMICL + * DMICR + * IN1 + * IN2 + * IN3 + * IN4 + * IN5 + * IN6 + * IN12 + * IN34 + * IN56 + * HPL + * HPR + * SPKL + * SPKR + * RCVL + * RCVR + * MICBIAS + +Example: + +audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; +};
--
1.8.1.5