[PATCH v10 4/8] arm: omap3: twl: add phy consumer data in twl4030_usb_data
From: Kishon Vijay Abraham I <hidden>
Date: 2013-07-26 12:46:50
Also in:
linux-arm-kernel, linux-fbdev, linux-media, linux-omap, linux-samsung-soc, lkml
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
The PHY framework uses the phy consumer data populated in platform data in the case of non-dt boot to return the reference to the PHY when the controller (PHY consumer) requests for it. So populated the phy consumer data in the platform data of twl usb. Signed-off-by: Kishon Vijay Abraham I <redacted> --- arch/arm/mach-omap2/twl-common.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898f..b0d54da 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c@@ -24,6 +24,7 @@ #include <linux/i2c/twl.h> #include <linux/gpio.h> #include <linux/string.h> +#include <linux/phy/phy.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h>
@@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void) } #if defined(CONFIG_ARCH_OMAP3) +struct phy_consumer consumers[] = { + PHY_CONSUMER("musb-hdrc.0", "usb"), +}; + +struct phy_init_data init_data = { + .consumers = consumers, + .num_consumers = ARRAY_SIZE(consumers), +}; + static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, + .init_data = &init_data, }; static int omap3_batt_table[] = {
--
1.7.10.4