[PATCH] spi/spi-altera: Allow to explicitely override bus number via dts
From: Tobias Klauser <hidden>
Date: 2012-01-31 15:54:06
Also in:
linux-spi
Subsystem:
open firmware and flattened device tree bindings, spi subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Mark Brown, Linus Torvalds
From: Frederic Lambert <redacted> Until now we let the code in spi.c assign us the bus number if the platform device didn't specify its id. This patch adds the possibility to explicitely specify the bus number via device tree. Signed-off-by: Frederic Lambert <redacted> Signed-off-by: Tobias Klauser <redacted> --- .../devicetree/bindings/spi/spi_altera.txt | 3 +++ drivers/spi/spi-altera.c | 9 +++++++++ 2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi_altera.txt b/Documentation/devicetree/bindings/spi/spi_altera.txt
index dda3759..3e0e921 100644
--- a/Documentation/devicetree/bindings/spi/spi_altera.txt
+++ b/Documentation/devicetree/bindings/spi/spi_altera.txt@@ -2,3 +2,6 @@ Altera SPI Required properties: - compatible : should be "ALTR,spi-1.0". + +Optional property: +- bus-number : SPI bus number
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 4813a63..d5bf52b 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c@@ -226,6 +226,15 @@ static int __devinit altera_spi_probe(struct platform_device *pdev) if (!master) return err; + /* bus_num is dynamically assigned when undefined (see spi.c) */ + /* look for a DTS entry to override this */ + if (pdev->id == -1 && pdev->dev.of_node != 0) { + u32 tmp; + + if (of_property_read_u32(pdev->dev.of_node, "bus-number", &tmp) == 0) + pdev->id = tmp; + } + /* setup the master state. */ master->bus_num = pdev->id; master->num_chipselect = 16;
--
1.7.5.4