[PATCH] i2c-designware: add OF binding support
From: Rob Herring <hidden>
Date: 2011-08-03 20:04:23
Also in:
linux-i2c
Subsystem:
i2c subsystem, i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Wolfram Sang, Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> Add of_match_table and DT style i2c registration to designware i2c driver. Signed-off-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Cc: Ben Dooks <redacted> Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org --- Documentation/devicetree/bindings/i2c/dw-i2c.txt | 23 ++++++++++++++++++++++ drivers/i2c/busses/i2c-designware.c | 13 ++++++++++++ 2 files changed, 36 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/dw-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/dw-i2c.txt b/Documentation/devicetree/bindings/i2c/dw-i2c.txt
new file mode 100644
index 0000000..cbcb404
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/dw-i2c.txt@@ -0,0 +1,23 @@ +* Synopsys DesignWare I2C + +Required properties : + + - compatible : should be "snps,designware-i2c" + - reg : Offset and length of the register set for the device + - interrupts : <IRQ> where IRQ is the interrupt number. + +Recommended properties : + + - clock-frequency : desired I2C bus clock frequency in Hz. + +Example : + + i2c@f0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xf0000 0x1000>; + interrupts = <11>; + clock-frequency = <400000>; + }; +
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b7a51c4..2911a49 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c@@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/of_i2c.h> /* * Registers offset
@@ -770,12 +771,17 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) adap->algo = &i2c_dw_algo; adap->dev.parent = &pdev->dev; +#ifdef CONFIG_OF + r = i2c_add_adapter(adap); +#else adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); +#endif if (r) { dev_err(&pdev->dev, "failure adding adapter\n"); goto err_free_irq; } + of_i2c_register_devices(adap); return 0;
@@ -819,6 +825,12 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id dw_i2c_of_match[] = { + { .compatible = "snps,designware-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_i2c_of_match); + /* work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_designware");
@@ -827,6 +839,7 @@ static struct platform_driver dw_i2c_driver = { .driver = { .name = "i2c_designware", .owner = THIS_MODULE, + .of_match_table = dw_i2c_of_match, }, };
--
1.7.4.1