[PATCH v2] can: sja1000: plx_pci: add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2012-10-17 10:10:01
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
From: Muhammad Ghias <redacted> Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030 bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested with kernel 3.6.1. Signed-off-by: Muhammad Ghias <redacted> Acked-by: Wolfgang Grandegger <redacted> [mkl: minor adjustments to commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- Hello, I'm going to take this patch, please test. regards, Marc drivers/net/can/sja1000/Kconfig | 1 + drivers/net/can/sja1000/plx_pci.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+)
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 03df9a8..559be87 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig@@ -93,6 +93,7 @@ config CAN_PLX_PCI - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) + - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) config CAN_TSCAN1 tristate "TS-CAN1 PC104 boards"
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 8bc9598..dc04407 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c@@ -44,6 +44,7 @@ MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, " "esd CAN-PCI/CPCI/PCI104/200, " "esd CAN-PCI/PMC/266, " "esd CAN-PCIe/2000, " + "Connect Tech Inc. CANpro/104-Plus Opto (CRG001), " "IXXAT PC-I 04/PCI") MODULE_LICENSE("GPL v2");
@@ -131,6 +132,9 @@ struct plx_pci_card { #define TEWS_PCI_VENDOR_ID 0x1498 #define TEWS_PCI_DEVICE_ID_TMPC810 0x032A +#define CTI_PCI_VENDOR_ID 0x12c4 +#define CTI_PCI_DEVICE_ID_CRG001 0x0900 + static void plx_pci_reset_common(struct pci_dev *pdev); static void plx_pci_reset_marathon(struct pci_dev *pdev); static void plx9056_pci_reset_common(struct pci_dev *pdev);
@@ -222,6 +226,14 @@ static struct plx_pci_card_info plx_pci_card_info_tews __devinitdata = { /* based on PLX9030 */ }; +static struct plx_pci_card_info plx_pci_card_info_cti __devinitdata = { + "Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, + &plx_pci_reset_common + /* based on PLX9030 */ +}; + static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = { { /* Adlink PCI-7841/cPCI-7841 */
@@ -300,6 +312,13 @@ static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = { 0, 0, (kernel_ulong_t)&plx_pci_card_info_tews }, + { + /* Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + CTI_PCI_VENDOR_ID, CTI_PCI_DEVICE_ID_CRG001, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_cti + }, { 0,} }; MODULE_DEVICE_TABLE(pci, plx_pci_tbl);
--
1.7.10