# 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- List: linux-bluetooth
- 18 messages, 4 authors
- Page: https://ratatoskr.run/linux-bluetooth/2011/11/9615744/t

## 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Michael Schmitt \<hidden\>
- Date: 2011-11-18 15:28:32 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615744.md

```text
Hi list,

as bugzilla.kernel.org seems to be down right now I thought about reporting directly to lkml but then I saw a bt-specific list and... here we are.

I have a Bluetooth USB-Stick that does not work anymore with more recent 2.6 and 3.x kernels. I have another stick which works ok on all kernels (at least with those I run / tested ;))

When plugged in, the USB-LED lights up permanently (no blinking), the bluetooth LED is off. It does not show up anywhere apart from hciconfig which reports it to be down and a hciconfig hci1 up times out after a few seconds.


adrastea:~# hcitool dev
Devices:
    hci0    11:11:11:11:11:11
adrastea:~# hciconfig
hci0:    Type: BR/EDR  Bus: USB
    BD Address: 11:11:11:11:11:11  ACL MTU: 678:8  SCO MTU: 48:10
    UP RUNNING PSCAN ISCAN
    RX bytes:1461 acl:0 sco:0 events:44 errors:0
    TX bytes:697 acl:0 sco:0 commands:44 errors:0

hci1:    Type: BR/EDR  Bus: USB
    BD Address: 00:04:0E:8C:E2:93  ACL MTU: 120:20  SCO MTU: 24:5
    DOWN
    RX bytes:1086 acl:0 sco:0 events:39 errors:0
    TX bytes:171 acl:0 sco:0 commands:39 errors:0

adrastea:~# hciconfig hci1 up
Can't init device hci1: Connection timed out (110)
adrastea:~#


I never bisected an issue, but if necessary I will try it out. But sure, I prefer that someone (Mr. Holtmann?) just has an heureka!-moment and knows the second he reads this report what went wrong in what patch / enhancement. :)
And as said (to make it utterly clear) the device works with older kernels. Tested and approved with kernel 2.6.32 (on Debian squeeze) and ist not physically broken.

Greetings
Michael

P.S.: Here the lsusb -v output for that device (if the usb-id is not enough):

Bus 004 Device 003: ID 057c:3800 AVM GmbH BlueFRITZ! Bluetooth Stick
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x057c AVM GmbH
  idProduct          0x3800 BlueFRITZ! Bluetooth Stick
  bcdDevice           15.00
  iManufacturer           1 Bluetooth Device
  iProduct                2 Bluetooth Device
  iSerial                 3 93E28C0E0400
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          177
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0009  1x 9 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0009  1x 9 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       2
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0011  1x 17 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0011  1x 17 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       3
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0019  1x 25 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0019  1x 25 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       4
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0021  1x 33 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0021  1x 33 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       5
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0031  1x 49 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0031  1x 49 bytes
        bInterval               1
Device Status:     0x0000
  (Bus Powered)

```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Johan Hedberg \<hidden\>
- Date: 2011-11-18 15:36:52 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615743.md

```text
Hi Michael,

On Fri, Nov 18, 2011, Michael Schmitt wrote:
> adrastea:~# hcitool dev
> Devices:
>     hci0    11:11:11:11:11:11
> adrastea:~# hciconfig
> hci0:    Type: BR/EDR  Bus: USB
>     BD Address: 11:11:11:11:11:11  ACL MTU: 678:8  SCO MTU: 48:10
>     UP RUNNING PSCAN ISCAN
>     RX bytes:1461 acl:0 sco:0 events:44 errors:0
>     TX bytes:697 acl:0 sco:0 commands:44 errors:0
> 
> hci1:    Type: BR/EDR  Bus: USB
>     BD Address: 00:04:0E:8C:E2:93  ACL MTU: 120:20  SCO MTU: 24:5
>     DOWN
>     RX bytes:1086 acl:0 sco:0 events:39 errors:0
>     TX bytes:171 acl:0 sco:0 commands:39 errors:0
> 
> adrastea:~# hciconfig hci1 up
> Can't init device hci1: Connection timed out (110)
> adrastea:~#

I'm pretty sure we'll at least need to see the hcidump output for the
initialization sequence of this adapter (i.e. start hcidump before
calling hciconfig hci0 up) and show us the output. Which Bluetooth
version does this adapter support and how old is it?

Johan
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Michael Schmitt \<hidden\>
- Date: 2011-11-18 15:49:28 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615741.md

```text
Am 18.11.2011 16:36, schrieb Johan Hedberg:
> Hi Michael,
>
> On Fri, Nov 18, 2011, Michael Schmitt wrote:
>> adrastea:~# hcitool dev
>> Devices:
>>      hci0    11:11:11:11:11:11
>> adrastea:~# hciconfig
>> hci0:    Type: BR/EDR  Bus: USB
>>      BD Address: 11:11:11:11:11:11  ACL MTU: 678:8  SCO MTU: 48:10
>>      UP RUNNING PSCAN ISCAN
>>      RX bytes:1461 acl:0 sco:0 events:44 errors:0
>>      TX bytes:697 acl:0 sco:0 commands:44 errors:0
>>
>> hci1:    Type: BR/EDR  Bus: USB
>>      BD Address: 00:04:0E:8C:E2:93  ACL MTU: 120:20  SCO MTU: 24:5
>>      DOWN
>>      RX bytes:1086 acl:0 sco:0 events:39 errors:0
>>      TX bytes:171 acl:0 sco:0 commands:39 errors:0
>>
>> adrastea:~# hciconfig hci1 up
>> Can't init device hci1: Connection timed out (110)
>> adrastea:~#
> I'm pretty sure we'll at least need to see the hcidump output for the
> initialization sequence of this adapter (i.e. start hcidump before
> calling hciconfig hci0 up) and show us the output. Which Bluetooth
> version does this adapter support and how old is it?
>
> Johan

Hi Johann,

let me fire up a machine that runs 2.6.32 (Debian squeeze) and where it works... or is there a way to get the bt-version it supports with the "broken" kernel? And no idea how old it is... at least some years as I got it for free from a buddy some time ago. It is from a AVM BlueTooth-ISDN-set which was in a box in the cellar and never used by the original owner (that was years ago too).
Anyway, here is the hcidump output as requested. Only the timespan since issueing hciconfig hci0 up and error message displayed in terminal:

adrastea:~# hcidump
HCI sniffer - Bluetooth packet analyzer ver 2.1
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Reset (0x03|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 4
    Reset (0x03|0x0003) ncmd 1
    status 0x00
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 12
    Read Local Supported Features (0x04|0x0003) ncmd 1
    status 0x00
    Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
    Read Local Version Information (0x04|0x0001) ncmd 1
    status 0x00
    HCI Version: 1.2 (0x2) HCI Revision: 0x2006
    LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
    Manufacturer: AVM Berlin (31)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
    Read Buffer Size (0x04|0x0005) ncmd 1
    status 0x00
    ACL MTU 120:20 SCO MTU 24:5
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> HCI Event: Command Complete (0x0e) plen 10
    Read BD ADDR (0x04|0x0009) ncmd 1
    status 0x00 bdaddr 00:04:0E:8C:E2:93
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
> HCI Event: Command Complete (0x0e) plen 7
    Read Class of Device (0x03|0x0023) ncmd 1
    status 0x00 class 0x000000
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
    Read Local Name (0x03|0x0014) ncmd 1
    status 0x00 name ''
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
    Read Voice Setting (0x03|0x0025) ncmd 1
    status 0x00 voice setting 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1
    type 0 condition 0
    Clear all filters
> HCI Event: Command Complete (0x0e) plen 4
    Set Event Filter (0x03|0x0005) ncmd 1
    status 0x00
< HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2
    timeout 32000
> HCI Event: Command Complete (0x0e) plen 4
    Write Connection Accept Timeout (0x03|0x0016) ncmd 1
    status 0x00
< HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
    bdaddr 00:00:00:00:00:00 all 1
> HCI Event: Command Complete (0x0e) plen 6
    Delete Stored Link Key (0x03|0x0012) ncmd 1
    status 0x00 deleted 0
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
    Mask: 0xfffffbff07180000
> HCI Event: Command Complete (0x0e) plen 4
    Set Event Mask (0x03|0x0001) ncmd 1
    status 0x00
< HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> HCI Event: Command Status (0x0f) plen 4
    Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
    Error: Unknown HCI Command

greetings
Michael
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Michael Schmitt \<hidden\>
- Date: 2011-11-18 16:17:06 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615740.md

```text
Am 18.11.2011 16:36, schrieb Johan Hedberg:
> Hi Michael,
>
> On Fri, Nov 18, 2011, Michael Schmitt wrote:
>> adrastea:~# hcitool dev
>> Devices:
>>      hci0    11:11:11:11:11:11
>> adrastea:~# hciconfig
>> hci0:    Type: BR/EDR  Bus: USB
>>      BD Address: 11:11:11:11:11:11  ACL MTU: 678:8  SCO MTU: 48:10
>>      UP RUNNING PSCAN ISCAN
>>      RX bytes:1461 acl:0 sco:0 events:44 errors:0
>>      TX bytes:697 acl:0 sco:0 commands:44 errors:0
>>
>> hci1:    Type: BR/EDR  Bus: USB
>>      BD Address: 00:04:0E:8C:E2:93  ACL MTU: 120:20  SCO MTU: 24:5
>>      DOWN
>>      RX bytes:1086 acl:0 sco:0 events:39 errors:0
>>      TX bytes:171 acl:0 sco:0 commands:39 errors:0
>>
>> adrastea:~# hciconfig hci1 up
>> Can't init device hci1: Connection timed out (110)
>> adrastea:~#
> I'm pretty sure we'll at least need to see the hcidump output for the
> initialization sequence of this adapter (i.e. start hcidump before
> calling hciconfig hci0 up) and show us the output. Which Bluetooth
> version does this adapter support and how old is it?
>
> Johan

I am not sure if this is the right version you were talking about, but here it is (from the squeeze box):

mschmitt@sogo:~$ /usr/sbin/hciconfig -a
hci0:    Type: BR/EDR  Bus: USB
    BD Address: 11:11:11:11:11:11  ACL MTU: 678:8  SCO MTU: 48:10
    UP RUNNING PSCAN
    RX bytes:969 acl:0 sco:0 events:27 errors:0
    TX bytes:361 acl:0 sco:0 commands:27 errors:0
    Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy: RSWITCH HOLD SNIFF PARK
    Link mode: SLAVE ACCEPT
    Name: 'sogo-0'
    Class: 0x4a0100
    Service Classes: Networking, Capturing, Telephony
    Device Class: Computer, Uncategorized
    HCI Version: 1.2 (0x2)  Revision: 0x1fe
    LMP Version: 1.2 (0x2)  Subversion: 0x1fe
    Manufacturer: Integrated System Solution Corp. (57)

greetings
Michael

```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Johan Hedberg \<hidden\>
- Date: 2011-11-18 16:21:11 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615739.md

```text
Hi Michael,

On Fri, Nov 18, 2011, Michael Schmitt wrote:
> < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
>     Read Local Version Information (0x04|0x0001) ncmd 1
>     status 0x00
>     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
>     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
>     Manufacturer: AVM Berlin (31)

Ok, so this is a 1.2 adapter.

> < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > HCI Event: Command Status (0x0f) plen 4
>     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
>     Error: Unknown HCI Command

This is the reason why you're getting a timeout. Since the adapter
claims to support Bluetooth version 1.2 it should also support this HCI
command, so from that perspective it's not conforming to the
specification. Right now the kernel (lib/bluetooth/hci_event.c) is
completely missing a command status handler for this command. If such a
handler was in place instead of a timeout you would be getting an
immediate error (the kernel maps this HCI status code to EBADRQC).

However, since this is also not acceptable behavior (as the adapter
still wouldn't work for you) I suspect the need for some
adapter-specific quirk is in place or then the kernel should just ignore
any errors for HCI_Read_Local_Supported_Commands.

Johan
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Michael Schmitt \<hidden\>
- Date: 2011-11-18 16:34:17 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615737.md

```text
Am 18.11.2011 17:21, schrieb Johan Hedberg:
> Hi Michael,
>
> On Fri, Nov 18, 2011, Michael Schmitt wrote:
>> <  HCI Command: Read Local Version Information (0x04|0x0001) plen 0
>>> HCI Event: Command Complete (0x0e) plen 12
>>      Read Local Version Information (0x04|0x0001) ncmd 1
>>      status 0x00
>>      HCI Version: 1.2 (0x2) HCI Revision: 0x2006
>>      LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
>>      Manufacturer: AVM Berlin (31)
>
> Ok, so this is a 1.2 adapter.
>
>> <  HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
>>> HCI Event: Command Status (0x0f) plen 4
>>      Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
>>      Error: Unknown HCI Command
>
> This is the reason why you're getting a timeout. Since the adapter
> claims to support Bluetooth version 1.2 it should also support this HCI
> command, so from that perspective it's not conforming to the
> specification. Right now the kernel (lib/bluetooth/hci_event.c) is
> completely missing a command status handler for this command. If such a
> handler was in place instead of a timeout you would be getting an
> immediate error (the kernel maps this HCI status code to EBADRQC).
>
> However, since this is also not acceptable behavior (as the adapter
> still wouldn't work for you) I suspect the need for some
> adapter-specific quirk is in place or then the kernel should just ignore
> any errors for HCI_Read_Local_Supported_Commands.
>
> Johan

Thanks for the input. But do you know why the device works with older kernel / userland? As Debian stable may be old, but not THAT old ;) (bluetooth 1.2 was released somewhere around 2005 I think).

So, and what do we do from here on? Btw. I did mix up the two bt-sticks I have so the last info was from the wrong stick. Here is the right info but it looks almost the same (at least the version numbers...):

mschmitt@sogo:~$ /usr/sbin/hciconfig -a
hci0:    Type: BR/EDR  Bus: USB
    BD Address: 00:04:0E:8C:E2:93  ACL MTU: 120:20  SCO MTU: 24:5
    UP RUNNING PSCAN ISCAN
    RX bytes:695 acl:0 sco:0 events:23 errors:0
    TX bytes:97 acl:0 sco:0 commands:23 errors:0
    Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy:
    Link mode: SLAVE ACCEPT
    Name: ''
    Class: 0x4a0000
    Service Classes: Networking, Capturing, Telephony
    Device Class: Miscellaneous,
    HCI Version: 1.2 (0x2)  Revision: 0x2006
    LMP Version: 1.2 (0x2)  Subversion: 0x1806
    Manufacturer: AVM Berlin (31)

greetings
Michael

```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Johan Hedberg \<hidden\>
- Date: 2011-11-18 20:30:19 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615729.md

```text
HI Michael,

On Fri, Nov 18, 2011, Michael Schmitt wrote:
> Thanks for the input. But do you know why the device works with
> older kernel / userland?>

Probably because the list of supported commands wasn't previously
requested as part of the adapter init sequence, or because the kernel
code didn't actually wait for all commands to complete before notifying
success to user space (I know the latter is at least true since I
submitted a patch for it).

> So, and what do we do from here on?

Well, the attached patch will at least make sure that the failure of
this command is correctly detected so you get an immediate error instead
of a timeout. The next step is to decide whether to do a quirk for your
specific adapter or to make it a general rule that errors for this
particular HCI command are ignored (for that we'd need feedback from the
real kernel experts like Marcel and Gustavo).

Johan
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Michael Schmitt \<hidden\>
- Date: 2011-11-20 15:27:59 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615711.md

```text
Am 18.11.2011 21:30, schrieb Johan Hedberg:
> HI Michael,
>
> On Fri, Nov 18, 2011, Michael Schmitt wrote:
>> Thanks for the input. But do you know why the device works with
>> older kernel / userland?>
> Probably because the list of supported commands wasn't previously
> requested as part of the adapter init sequence, or because the kernel
> code didn't actually wait for all commands to complete before notifying
> success to user space (I know the latter is at least true since I
> submitted a patch for it).

So that means, if the bt-stack in the kernel would ignore the successful completion of those "what protocol version do you understand"-commands all bt-related stuff with the stick would work nevertheless?

>> So, and what do we do from here on?
> Well, the attached patch will at least make sure that the failure of
> this command is correctly detected so you get an immediate error instead
> of a timeout. The next step is to decide whether to do a quirk for your
> specific adapter or to make it a general rule that errors for this
> particular HCI command are ignored (for that we'd need feedback from the
> real kernel experts like Marcel and Gustavo).

But apparently none of them had the urge to actually respond in this ml-thread yet. :) Let's see, I try to poke them "mildly" in cc'ing them...

General speaking, the bt-stick in question is old (at least 5 years or so) and I have another (working) stick here, so there is no immediate adversity for me. But I guess as this stick is from major bt-accessoirs supplier from germany (AVM GmbH Berlin) this hardware may be around for many users for a fairly long time. But then again... it seems to be a hardware-bug...

Anyway, I guess it would ne nice to have it "fixed" someday. :)

Greetings
Michael
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Andrei Emeltchenko \<hidden\>
- Date: 2011-11-21 08:57:06 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615703.md

```text
Hi Johan,

On Fri, Nov 18, 2011 at 06:21:11PM +0200, Johan Hedberg wrote:
> Hi Michael,
> 
> On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > HCI Event: Command Complete (0x0e) plen 12
> >     Read Local Version Information (0x04|0x0001) ncmd 1
> >     status 0x00
> >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> >     Manufacturer: AVM Berlin (31)
> 
> Ok, so this is a 1.2 adapter.
> 
> > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > HCI Event: Command Status (0x0f) plen 4
> >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> >     Error: Unknown HCI Command
> 
> This is the reason why you're getting a timeout. Since the adapter
> claims to support Bluetooth version 1.2 it should also support this HCI
> command, so from that perspective it's not conforming to the

Apparently we check for "Bluetooth Core Specification 1.1" 

Shall we change to:

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index f0fbb02..ed55b33 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
 {
        hci_setup_event_mask(hdev);
 
-       if (hdev->lmp_ver > 1)
+       if (hdev->lmp_ver > 2)
                hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
 
        if (hdev->features[6] & LMP_SIMPLE_PAIR) {

Reference:
https://www.bluetooth.org/Technical/AssignedNumbers/link_manager.htm

Best regards 
Andrei Emeltchenko 

> specification. Right now the kernel (lib/bluetooth/hci_event.c) is
> completely missing a command status handler for this command. If such a
> handler was in place instead of a timeout you would be getting an
> immediate error (the kernel maps this HCI status code to EBADRQC).
> 
> However, since this is also not acceptable behavior (as the adapter
> still wouldn't work for you) I suspect the need for some
> adapter-specific quirk is in place or then the kernel should just ignore
> any errors for HCI_Read_Local_Supported_Commands.
> 
> Johan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Andrei Emeltchenko \<hidden\>
- Date: 2011-11-21 09:12:55 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615702.md

```text
On Mon, Nov 21, 2011 at 10:57:06AM +0200, Andrei Emeltchenko wrote:
> Hi Johan,
> 
> On Fri, Nov 18, 2011 at 06:21:11PM +0200, Johan Hedberg wrote:
> > Hi Michael,
> > 
> > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > HCI Event: Command Complete (0x0e) plen 12
> > >     Read Local Version Information (0x04|0x0001) ncmd 1
> > >     status 0x00
> > >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > >     Manufacturer: AVM Berlin (31)
> > 
> > Ok, so this is a 1.2 adapter.
> > 
> > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > HCI Event: Command Status (0x0f) plen 4
> > >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > >     Error: Unknown HCI Command
> > 
> > This is the reason why you're getting a timeout. Since the adapter
> > claims to support Bluetooth version 1.2 it should also support this HCI
> > command, so from that perspective it's not conforming to the
> 
> Apparently we check for "Bluetooth Core Specification 1.1"

Sorry, it is already checking for it.

Discard the code below.

Best regards 
Andrei Emeltchenko  

> 
> Shall we change to:
> 
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index f0fbb02..ed55b33 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
>  {
>         hci_setup_event_mask(hdev);
>  
> -       if (hdev->lmp_ver > 1)
> +       if (hdev->lmp_ver > 2)
>                 hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
>  
>         if (hdev->features[6] & LMP_SIMPLE_PAIR) {
> 
> Reference:
> https://www.bluetooth.org/Technical/AssignedNumbers/link_manager.htm
> 
> Best regards 
> Andrei Emeltchenko 
> 
> > specification. Right now the kernel (lib/bluetooth/hci_event.c) is
> > completely missing a command status handler for this command. If such a
> > handler was in place instead of a timeout you would be getting an
> > immediate error (the kernel maps this HCI status code to EBADRQC).
> > 
> > However, since this is also not acceptable behavior (as the adapter
> > still wouldn't work for you) I suspect the need for some
> > adapter-specific quirk is in place or then the kernel should just ignore
> > any errors for HCI_Read_Local_Supported_Commands.
> > 
> > Johan
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Marcel Holtmann \<marcel@holtmann.org\>
- Date: 2011-11-21 09:13:49 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615701.md

```text
Hi Andrei,

> > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > HCI Event: Command Complete (0x0e) plen 12
> > >     Read Local Version Information (0x04|0x0001) ncmd 1
> > >     status 0x00
> > >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > >     Manufacturer: AVM Berlin (31)
> > 
> > Ok, so this is a 1.2 adapter.
> > 
> > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > HCI Event: Command Status (0x0f) plen 4
> > >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > >     Error: Unknown HCI Command
> > 
> > This is the reason why you're getting a timeout. Since the adapter
> > claims to support Bluetooth version 1.2 it should also support this HCI
> > command, so from that perspective it's not conforming to the
> 
> Apparently we check for "Bluetooth Core Specification 1.1" 
> 
> Shall we change to:
> 
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index f0fbb02..ed55b33 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
>  {
>         hci_setup_event_mask(hdev);
>  
> -       if (hdev->lmp_ver > 1)
> +       if (hdev->lmp_ver > 2)
>                 hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);

0x00 is 1.0b and 0x01 is 1.1. So you are changing the check from 1.2 to
2.0. The command was introduced with 1.2 actually.

The only real change that needs to be done here is to check hci_ver
instead of lmp_ver. This command is a HCI feature and not a LMP feature
actually.

Regards

Marcel


```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Andrei Emeltchenko \<hidden\>
- Date: 2011-11-21 10:22:02 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615689.md

```text
Hi Marcel,

On Mon, Nov 21, 2011 at 10:13:49AM +0100, Marcel Holtmann wrote:
> Hi Andrei,
> 
> > > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > > HCI Event: Command Complete (0x0e) plen 12
> > > >     Read Local Version Information (0x04|0x0001) ncmd 1
> > > >     status 0x00
> > > >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > > >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > > >     Manufacturer: AVM Berlin (31)
> > > 
> > > Ok, so this is a 1.2 adapter.
> > > 
> > > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > > HCI Event: Command Status (0x0f) plen 4
> > > >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > > >     Error: Unknown HCI Command
> > > 
> > > This is the reason why you're getting a timeout. Since the adapter
> > > claims to support Bluetooth version 1.2 it should also support this HCI
> > > command, so from that perspective it's not conforming to the
> > 
> > Apparently we check for "Bluetooth Core Specification 1.1" 
> > 
> > Shall we change to:
> > 
> > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > index f0fbb02..ed55b33 100644
> > --- a/net/bluetooth/hci_event.c
> > +++ b/net/bluetooth/hci_event.c
> > @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
> >  {
> >         hci_setup_event_mask(hdev);
> >  
> > -       if (hdev->lmp_ver > 1)
> > +       if (hdev->lmp_ver > 2)
> >                 hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
> 
> 0x00 is 1.0b and 0x01 is 1.1. So you are changing the check from 1.2 to
> 2.0. The command was introduced with 1.2 actually.

Can we define in bluetooth.h something like:

#define BLUETOOTH_LMP_VER_1.1	1
#define BLUETOOTH_LMP_VER_1.2	2

> The only real change that needs to be done here is to check hci_ver
> instead of lmp_ver. This command is a HCI feature and not a LMP feature
> actually.

Maybe same define for HCI_VER ?

Best regards 
Andrei Emeltchenko 
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Johan Hedberg \<hidden\>
- Date: 2011-11-21 10:35:47 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615688.md

```text
Hi Marcel,

On Mon, Nov 21, 2011, Marcel Holtmann wrote:
> > > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > > HCI Event: Command Complete (0x0e) plen 12
> > > >     Read Local Version Information (0x04|0x0001) ncmd 1
> > > >     status 0x00
> > > >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > > >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > > >     Manufacturer: AVM Berlin (31)
> > > 
> > > Ok, so this is a 1.2 adapter.
> > > 
> > > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > > HCI Event: Command Status (0x0f) plen 4
> > > >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > > >     Error: Unknown HCI Command
> > > 
> > > This is the reason why you're getting a timeout. Since the adapter
> > > claims to support Bluetooth version 1.2 it should also support this HCI
> > > command, so from that perspective it's not conforming to the
> > 
> > Apparently we check for "Bluetooth Core Specification 1.1" 
> > 
> > Shall we change to:
> > 
> > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > index f0fbb02..ed55b33 100644
> > --- a/net/bluetooth/hci_event.c
> > +++ b/net/bluetooth/hci_event.c
> > @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
> >  {
> >         hci_setup_event_mask(hdev);
> >  
> > -       if (hdev->lmp_ver > 1)
> > +       if (hdev->lmp_ver > 2)
> >                 hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
> 
> 0x00 is 1.0b and 0x01 is 1.1. So you are changing the check from 1.2 to
> 2.0. The command was introduced with 1.2 actually.
> 
> The only real change that needs to be done here is to check hci_ver
> instead of lmp_ver. This command is a HCI feature and not a LMP feature
> actually.

That doesn't help much with this particular dongle though since the LMP
and HCI versions are the same. What I'd propose is the patch which I
already attached to an earlier email in this thread and then either a
quirk for this adapter or just generally ignoring the
HCI_Read_Local_Commands failure status.

Johan
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Marcel Holtmann \<marcel@holtmann.org\>
- Date: 2011-11-21 13:03:02 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615677.md

```text
Hi Andrei,

> > > > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > > > HCI Event: Command Complete (0x0e) plen 12
> > > > >     Read Local Version Information (0x04|0x0001) ncmd 1
> > > > >     status 0x00
> > > > >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > > > >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > > > >     Manufacturer: AVM Berlin (31)
> > > > 
> > > > Ok, so this is a 1.2 adapter.
> > > > 
> > > > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > > > HCI Event: Command Status (0x0f) plen 4
> > > > >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > > > >     Error: Unknown HCI Command
> > > > 
> > > > This is the reason why you're getting a timeout. Since the adapter
> > > > claims to support Bluetooth version 1.2 it should also support this HCI
> > > > command, so from that perspective it's not conforming to the
> > > 
> > > Apparently we check for "Bluetooth Core Specification 1.1" 
> > > 
> > > Shall we change to:
> > > 
> > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > > index f0fbb02..ed55b33 100644
> > > --- a/net/bluetooth/hci_event.c
> > > +++ b/net/bluetooth/hci_event.c
> > > @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
> > >  {
> > >         hci_setup_event_mask(hdev);
> > >  
> > > -       if (hdev->lmp_ver > 1)
> > > +       if (hdev->lmp_ver > 2)
> > >                 hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
> > 
> > 0x00 is 1.0b and 0x01 is 1.1. So you are changing the check from 1.2 to
> > 2.0. The command was introduced with 1.2 actually.
> 
> Can we define in bluetooth.h something like:
> 
> #define BLUETOOTH_LMP_VER_1.1	1
> #define BLUETOOTH_LMP_VER_1.2	2

yes, but just leave LMP out of it. Just do BLUETOOTH_VER_1_1 or similar.
Even the . in the define will not work out.

> > The only real change that needs to be done here is to check hci_ver
> > instead of lmp_ver. This command is a HCI feature and not a LMP feature
> > actually.
> 
> Maybe same define for HCI_VER ?

They are identical. So one is enough. They just have a different
meaning. The LMP is air protocol version and HCI is host controller
version. In most cases they are the same, but not have to be.

Regards

Marcel


```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Marcel Holtmann \<marcel@holtmann.org\>
- Date: 2011-11-21 13:04:38 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615676.md

```text
Hi Johan,

> > > > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > > > HCI Event: Command Complete (0x0e) plen 12
> > > > >     Read Local Version Information (0x04|0x0001) ncmd 1
> > > > >     status 0x00
> > > > >     HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > > > >     LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > > > >     Manufacturer: AVM Berlin (31)
> > > > 
> > > > Ok, so this is a 1.2 adapter.
> > > > 
> > > > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > > > HCI Event: Command Status (0x0f) plen 4
> > > > >     Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > > > >     Error: Unknown HCI Command
> > > > 
> > > > This is the reason why you're getting a timeout. Since the adapter
> > > > claims to support Bluetooth version 1.2 it should also support this HCI
> > > > command, so from that perspective it's not conforming to the
> > > 
> > > Apparently we check for "Bluetooth Core Specification 1.1" 
> > > 
> > > Shall we change to:
> > > 
> > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > > index f0fbb02..ed55b33 100644
> > > --- a/net/bluetooth/hci_event.c
> > > +++ b/net/bluetooth/hci_event.c
> > > @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
> > >  {
> > >         hci_setup_event_mask(hdev);
> > >  
> > > -       if (hdev->lmp_ver > 1)
> > > +       if (hdev->lmp_ver > 2)
> > >                 hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
> > 
> > 0x00 is 1.0b and 0x01 is 1.1. So you are changing the check from 1.2 to
> > 2.0. The command was introduced with 1.2 actually.
> > 
> > The only real change that needs to be done here is to check hci_ver
> > instead of lmp_ver. This command is a HCI feature and not a LMP feature
> > actually.
> 
> That doesn't help much with this particular dongle though since the LMP
> and HCI versions are the same. What I'd propose is the patch which I
> already attached to an earlier email in this thread and then either a
> quirk for this adapter or just generally ignoring the
> HCI_Read_Local_Commands failure status.

using lmp_ver instead of hci_ver is still a bug, but fair enough it is a
different bug.

I am fine just allowing Read_Local_Commands to fail. However that will
serious limit some features since we have to be using the result more
often in the future. But luckily that does not matter for 1.2 controller
at all.

Regards

Marcel


```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Johan Hedberg \<hidden\>
- Date: 2011-11-21 15:21:11 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615670.md

```text
Hi Marcel,

On Mon, Nov 21, 2011, Marcel Holtmann wrote:
> > That doesn't help much with this particular dongle though since the LMP
> > and HCI versions are the same. What I'd propose is the patch which I
> > already attached to an earlier email in this thread and then either a
> > quirk for this adapter or just generally ignoring the
> > HCI_Read_Local_Commands failure status.
> 
> using lmp_ver instead of hci_ver is still a bug, but fair enough it is a
> different bug.
> 
> I am fine just allowing Read_Local_Commands to fail. However that will
> serious limit some features since we have to be using the result more
> often in the future. But luckily that does not matter for 1.2 controller
> at all.

Ok. I just sent two patches for this. I have a hunch these might also
fix the recently reported "resume takes longer due to increased timeout"
regression report.

Johan
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Michael Schmitt \<hidden\>
- Date: 2011-11-27 10:04:31 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615498.md

```text
Just as a follow-up question (as I did not get a clear conclusion out of the discussion and it seems to me the "discussion" did stop without a real conclusion)...

What is the plan right now? Will there be a patch upstream (in the kernel) at some point? Is it not clear how to fix that (broken?) hardware driver-wise yet? Should I test something?

regards
Michael
```

## Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

- From: Andrei Emeltchenko \<hidden\>
- Date: 2011-11-28 08:42:08 
- Message: https://ratatoskr.run/linux-bluetooth/2011/11/9615489.md

```text
Hi Michael,

On Sun, Nov 27, 2011 at 11:04:31AM +0100, Michael Schmitt wrote:
> Just as a follow-up question (as I did not get a clear conclusion
> out of the discussion and it seems to me the "discussion" did stop
> without a real conclusion)...
> 
> What is the plan right now? Will there be a patch upstream (in the
> kernel) at some point? Is it not clear how to fix that (broken?)
> hardware driver-wise yet? Should I test something?

Could you test Johan's patch:

http://permalink.gmane.org/gmane.linux.bluez.kernel/18752

[PATCH 2/2] Bluetooth: Ignore HCI_Read_Local_Commands failures

You can also apply the first patch.

Best regards 
Andrei Emeltchenko 

> 
> regards
> Michael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
```
