Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
From: Naresh Kamboju <hidden>
Date: 2021-07-23 11:56:38
On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman [off-list ref] wrote:
This is the start of the stable review cycle for the 5.13.5 release.
There are 156 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
and the diffstat can be found below.
thanks,
greg k-h
The following error is due to SATA drive format failing with arm64 64k-page
size ( CONFIG_ARM64_64K_PAGES=y ) kernel.
while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel.
First it was noticed on the stable-rc 5.13.3-rc2 kernel.
Whereas 64bit kernel and 32bit kernel pass with 4K page size.
Initially, I thought it could be a Hard drive fault but it is reproducible on
other devices but not always. Which is a blocker to bisect the problem.
The steps to reproduce:
- Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1]
- CONFIG_ARM64_64K_PAGES=y
- format connected SATA drives and mount /scratch
- Use the mounted /scratch for LTP runs to create and delete files from this
- cd /opt/ltp
- ./runltp -d /scratch -f syscalls
error log:
-------------
tst_device.c:89: TINFO: Found free device 0 '/dev/loop0'
tst_test.c:889: TINFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.8 (1-Jan-2018)
[ 776.850122] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 776.874645] ata1.00: configured for UDMA/100
[ 776.879042] ata1: EH complete
[ 776.912010] ata1.00: exception Emask 0x20 SAct 0xc0 SErr 0x0 action
0x6 frozen
[ 776.919299] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 776.926983] ata1.00: failed command: WRITE FPDMA QUEUED
[ 776.932263] ata1.00: cmd 61/08:30:00:10:84/00:00:06:00:00/40 tag 6
ncq dma 4096 out
[ 776.932263] res e6/ff:00:00:00:00/00:00:00:00:e6/00 Emask
0x22 (host bus error)
[ 776.948089] ata1.00: status: { Busy }
[ 776.951766] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }