# Re: Windows IOPS Benchmark

- From: Jonathan Tripathy \<hidden\>
- Date: 2012-08-30 00:13:10 
- List: linux-bcache
- Page: https://ratatoskr.run/linux-bcache/2012/08/7635664
- Thread: https://ratatoskr.run/linux-bcache/2012/08/7635664/t.md

```text
On 30/08/2012 01:09, Jonathan Tripathy wrote:
> Hi Everyone,
>
> I'm using bcache with a RAID1 pair of SSDs (for the cache) with a MD-RAID10 spindle array for the backing device. On top of this is LVM. This setup is used with the Xen Hypervisor. Bcache is formatted with a sector size of 512 bytes.
>
> If I use an LV for a Linux DomU, I get fantastic disk performance using fio (about 23k random write). However, when I use IOMeter in a Windows HVM DomU (with GPLPV drivers installed), my avg IOPS is around 4000. I am using the "default" Access Specification. Am I doing something wrong? Changing the number of workers doesn't seem to help.
>
> Any advice is appreciated.
>
> Thanks
>
Actually nvm, I forgot to enable the dist target for each of the works. Now I'm getting an avg iops of about 34k.

But this does leave me with a question: is the number of "workers" in IOMeter akin to "IO Depth" in fio?

Thanks
```
