[PATCH v2 08/10] ARM: dts: aspeed: system1: Remove VRs max8952
From: Ninad Palsule <ninad@linux.ibm.com>
Date: 2025-01-07 16:24:47
Also in:
linux-arm-kernel, linux-devicetree, lkml, netdev
Subsystem:
arm/aspeed machine support, the rest · Maintainers:
Joel Stanley, Andrew Jeffery, Linus Torvalds
Removing voltage regulators max8952 from device tree. Those are fully controlled by hardware and firmware should not touch them. Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> --- .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 34 ------------------- 1 file changed, 34 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 5e6824836213..90570b4d6d35 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts@@ -514,23 +514,6 @@ eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; - - regulator@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "VR_v77_1v4"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; }; &i2c1 {
@@ -1226,23 +1209,6 @@ eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; - - regulator@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "VR_v77_1v4"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; }; &i2c11 {
--
2.43.0