[PATCH 4/7] phy: phy-mtk-tphy: disable hardware efuse when set INTR
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: 2022-08-19 09:14:38
Also in:
linux-devicetree, linux-mediatek, linux-phy, lkml
Subsystem:
arm/mediatek usb3 phy driver, generic phy framework, the rest · Maintainers:
Chunfeng Yun, Vinod Koul, Linus Torvalds
INTR's value is able autoload from hardware efuse by default, when software tries to update its value, should disable hardware efuse firstly. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- drivers/phy/mediatek/phy-mtk-tphy.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 986fde0f63a0..7f40b8b052bd 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c@@ -874,9 +874,14 @@ static void u2_phy_props_set(struct mtk_tphy *tphy, mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, PA1_RG_TERM_SEL_VAL(instance->eye_term)); - if (instance->intr) + if (instance->intr) { + if (u2_banks->misc) + mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, + MR1_EFUSE_AUTO_LOAD_DIS); + mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, PA1_RG_INTR_CAL_VAL(instance->intr)); + } if (instance->discth) mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel