[PATCH v16 0/3] Add Wacom I2C support to rM2

@@ -1331,6 +1331,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	input = field->hidinput->input;
 
+	if (usage->type == EV_ABS &&
+		(((*quirks & HID_QUIRK_X_INVERT) && usage->code == ABS_X) ||
+		 ((*quirks & HID_QUIRK_Y_INVERT) && usage->code == ABS_Y))) {
+			value = field->logical_maximum - value;
+	}
+
 	if (usage->hat_min < usage->hat_max || usage->hat_dir) {
 		int hat_dir = usage->hat_dir;
 		if (!hat_dir)

@@ -349,6 +349,8 @@ struct hid_item {
 /* BIT(9) reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
 #define HID_QUIRK_ALWAYS_POLL			BIT(10)
 #define HID_QUIRK_INPUT_PER_APP			BIT(11)
+#define HID_QUIRK_X_INVERT			BIT(12)
+#define HID_QUIRK_Y_INVERT			BIT(13)
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		BIT(16)
 #define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		BIT(17)
 #define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP	BIT(18)

@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
 - vdd-supply: phandle of the regulator that provides the supply voltage.
 - post-power-on-delay-ms: time required by the device after enabling its regulators
   or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
 
 Example:
 

@@ -111,7 +111,7 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
 	}
 
 	return i2c_hid_core_probe(client, &ihid_acpi->ops,
-				  hid_descriptor_address);
+				  hid_descriptor_address, 0);
 }
 
 static const struct acpi_device_id i2c_hid_acpi_match[] = {

@@ -912,7 +912,7 @@ static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
 }
 
 int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
-		       u16 hid_descriptor_address)
+		       u16 hid_descriptor_address, u32 quirks)
 {
 	int ret;
 	struct i2c_hid *ihid;

@@ -1009,6 +1009,8 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 		goto err_mem_free;
 	}
 
+	hid->quirks |= quirks;
+
 	return 0;
 
 err_mem_free:

@@ -150,7 +150,7 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client,
 		goodix_i2c_hid_deassert_reset(ihid_goodix, true);
 	mutex_unlock(&ihid_goodix->regulator_mutex);
 
-	return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+	return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
 }
 
 static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {

@@ -21,6 +21,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/hid.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/module.h>

@@ -71,6 +72,7 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct i2c_hid_of *ihid_of;
 	u16 hid_descriptor_address;
+	u32 quirks = 0;
 	int ret;
 	u32 val;
 

@@ -105,8 +107,15 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
+	if (device_property_read_bool(dev, "touchscreen-inverted-x")) {
+		quirks |= HID_QUIRK_X_INVERT;
+	}
+	if (device_property_read_bool(dev, "touchscreen-inverted-y")) {
+		quirks |= HID_QUIRK_Y_INVERT;
+	}
+
 	return i2c_hid_core_probe(client, &ihid_of->ops,
-				  hid_descriptor_address);
+				  hid_descriptor_address, quirks);
 }
 
 static const struct of_device_id i2c_hid_of_match[] = {

@@ -32,7 +32,7 @@ struct i2chid_ops {
 };
 
 int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
-		       u16 hid_descriptor_address);
+		       u16 hid_descriptor_address, u32 quirks);
 int i2c_hid_core_remove(struct i2c_client *client);
 
 void i2c_hid_core_shutdown(struct i2c_client *client);

@@ -34,6 +34,19 @@ reg_brcm: regulator-brcm {
 		startup-delay-us = <150>;
 	};
 
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";

@@ -51,6 +64,26 @@ &clks {
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };

@@ -117,6 +150,25 @@ &wdog1 {
 	fsl,ext-reset-output;
 };
 
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
 &iomuxc {
 	pinctrl_brcm_reg: brcmreggrp {
 		fsl,pins = <

@@ -125,6 +177,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79