diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a14a6173b765..f518eb1e1142 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
+
+# required for overlay support
+DTC_FLAGS_fsl-ls1028a-qds := -@
+DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
+DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-899b := -@
+DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
+
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
@@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
new file mode 100644
index 000000000000..f748a2c12a70
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy@2 {
+ /* AQR112 */
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on AQR412 */
+ slot2_qxgmii0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii2: ethernet-phy@2 {
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii3: ethernet-phy@3 {
+ reg = <0x3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii0>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii1>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii2>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii3>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
new file mode 100644
index 000000000000..8ffb707a1576
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy@2 {
+ /* AQR112 */
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on VSC8514 */
+ slot2_qsgmii0: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ slot2_qsgmii1: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ slot2_qsgmii2: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ slot2_qsgmii3: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii0>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii1>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii2>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii3>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
new file mode 100644
index 000000000000..eb6a1e674f10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on AQR412 */
+ slot1_sxgmii0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii2: ethernet-phy@2 {
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii3: ethernet-phy@3 {
+ reg = <0x3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii0>;
+ phy-mode = "2500base-x";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii1>;
+ phy-mode = "2500base-x";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii2>;
+ phy-mode = "2500base-x";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii3>;
+ phy-mode = "2500base-x";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
new file mode 100644
index 000000000000..8e90c3088ba1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy@1c {
+ /* 1st port on VSC8234 */
+ reg = <0x1c>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on VSC8514 */
+ slot2_qsgmii0: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ slot2_qsgmii1: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ slot2_qsgmii2: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ slot2_qsgmii3: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii0>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii1>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii2>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii3>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
new file mode 100644
index 000000000000..5d0a094e6c44
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VSC8234 */
+ slot1_sgmii0: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ slot1_sgmii1: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ slot1_sgmii2: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ slot1_sgmii3: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+ __overlay__ {
+ phy-handle = <&slot1_sgmii0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mscc_felix_ports>;
+ __overlay__ {
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii1>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
new file mode 100644
index 000000000000..1ef743c48e84
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VSC8234 */
+ slot1_sgmii0: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ slot1_sgmii1: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ slot1_sgmii2: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ slot1_sgmii3: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&mscc_felix_ports>;
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii1>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii3>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 782853a449cc..177bc1405f0f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -211,6 +211,16 @@ &duart1 {
status = "okay";
};
+&enetc_port1 {
+ phy-handle = <&qds_phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};@@ -326,17 +336,16 @@ rtc@51 {
};
};
-&enetc_port1 {
- phy-handle = <&qds_phy1>;
- phy-mode = "rgmii-id";
+&lpuart0 {
status = "okay";
};
-&lpuart0 {
+&lpuart1 {
status = "okay";
};
-&lpuart1 {
+&mscc_felix_port4 {
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5c17dfaa50de..f305ac2906d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1115,7 +1115,7 @@ mscc_felix: ethernet-switch@0,5 {
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- ports {
+ mscc_felix_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel