[PATCH 2/7] dt-bindings: watchdog: Document Exynos850 watchdog bindings
From: Sam Protsenko <semen.protsenko@linaro.org>
Date: 2021-10-28 18:35:40
Also in:
linux-devicetree, linux-samsung-soc, linux-watchdog, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
Exynos850 SoC has two CPU clusters: - cluster 0: contains CPUs #0, #1, #2, #3 - cluster 1: contains CPUs #4, #5, #6, #7 Each cluster has its own dedicater watchdog timer. Those WDT instances are controlled using different bits in PMU registers, so there should be two different compatible strings (for each cluster), to tell the driver which bits to use for each WDT instance. Also on Exynos850 the peripheral clock and the source clock are two different clocks. Provide a way to specify two clocks in watchdog device tree node. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- .../devicetree/bindings/watchdog/samsung-wdt.yaml | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 93cd77a6e92c..19c7f7767559 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml@@ -22,16 +22,24 @@ properties: - samsung,exynos5250-wdt # for Exynos5250 - samsung,exynos5420-wdt # for Exynos5420 - samsung,exynos7-wdt # for Exynos7 + - samsung,exynos850-cl0-wdt # for Exynos850 (CPU cluster 0) + - samsung,exynos850-cl1-wdt # for Exynos850 (CPU cluster 1) reg: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + items: + - description: Peripheral clock used for register interface; if it's the + only clock, it's also a source clock + - description: Source clock (optional) clock-names: + minItems: 1 items: - const: watchdog + - const: watchdog_src interrupts: maxItems: 1
@@ -40,7 +48,7 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the PMU system controller node (in case of Exynos5250, - Exynos5420 and Exynos7). + Exynos5420, Exynos7 and Exynos850). required: - compatible
@@ -59,6 +67,8 @@ allOf: - samsung,exynos5250-wdt - samsung,exynos5420-wdt - samsung,exynos7-wdt + - samsung,exynos850-cl0-wdt + - samsung,exynos850-cl1-wdt then: required: - samsung,syscon-phandle
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel