Reorder clk_get_rate, so it's called after clk_prepare_enable and
after devm_add_action_or_reset of lpc18xx_clk_disable.

Signed-off-by: André Gustavo Nakagomi Lopez <redacted>
---
  drivers/iio/adc/lpc18xx_adc.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c
index ceefa4d793cf..ae9c9384f23e 100644
--- a/drivers/iio/adc/lpc18xx_adc.c
+++ b/drivers/iio/adc/lpc18xx_adc.c

@@ -157,9 +157,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
  		return dev_err_probe(&pdev->dev, PTR_ERR(adc->clk),
  				     "error getting clock\n");
  
-	rate = clk_get_rate(adc->clk);
-	clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
-
  	adc->vref = devm_regulator_get(&pdev->dev, "vref");
  	if (IS_ERR(adc->vref))
  		return dev_err_probe(&pdev->dev, PTR_ERR(adc->vref),

@@ -192,6 +189,9 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
  	if (ret)
  		return ret;
  
+	rate = clk_get_rate(adc->clk);
+	clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
+
  	adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) |
  			LPC18XX_ADC_CR_PDN;
  	writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR);