[PATCH v4 0/2] pinctrl: pinctrl-microchip-sgpio: Extend to call reset driver

STALE1762d

Revision v4 of 5 in this series.

4 messages, 2 authors, 2021-10-15 · open the first message on its own page

[PATCH v4 0/2] pinctrl: pinctrl-microchip-sgpio: Extend to call reset driver

From: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: 2021-10-15 13:25:16

This allows the driver to call an optional reset driver.

v3->v4:
 - use devm_reset_control_get_optional_shared
 - remove the expected name of the reset line

v2->v3:
 - fix warnings reported by 'make dtbs_check'

v1->v2:
 - add dt-bindings changes


Horatiu Vultur (2):
  dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
  pinctrl: microchip sgpio: use reset driver

 .../devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml  | 3 +++
 drivers/pinctrl/pinctrl-microchip-sgpio.c                    | 5 +++++
 2 files changed, 8 insertions(+)

-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 1/2] dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding

From: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: 2021-10-15 13:25:18

This describes the new binding which allows to call a reset driver from
the pinctrl-microchip-sgpio driver.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 .../devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml    | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index 4fe35e650909..b0b7d02a57e0 100644
--- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -68,6 +68,9 @@ properties:
       clock, and larger than zero.
     default: 12500000
 
+  resets:
+    maxItems: 1
+
 patternProperties:
   "^gpio@[0-1]$":
     type: object
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 2/2] pinctrl: microchip sgpio: use reset driver

From: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: 2021-10-15 13:25:21

On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 drivers/pinctrl/pinctrl-microchip-sgpio.c | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 072bccdea2a5..23f5a744edc4 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -17,6 +17,7 @@
 #include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/reset.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 	int div_clock = 0, ret, port, i, nbanks;
 	struct device *dev = &pdev->dev;
 	struct fwnode_handle *fwnode;
+	struct reset_control *reset;
 	struct sgpio_priv *priv;
 	struct clk *clk;
 	u32 val;
@@ -813,6 +815,9 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 
+	reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	reset_control_reset(reset);
+
 	clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk))
 		return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 2/2] pinctrl: microchip sgpio: use reset driver

From: Philipp Zabel <p.zabel@pengutronix.de>
Date: 2021-10-15 13:39:17

On Fri, 2021-10-15 at 15:25 +0200, Horatiu Vultur wrote:
quoted hunk
On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 drivers/pinctrl/pinctrl-microchip-sgpio.c | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 072bccdea2a5..23f5a744edc4 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -17,6 +17,7 @@
 #include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/reset.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 	int div_clock = 0, ret, port, i, nbanks;
 	struct device *dev = &pdev->dev;
 	struct fwnode_handle *fwnode;
+	struct reset_control *reset;
 	struct sgpio_priv *priv;
 	struct clk *clk;
 	u32 val;
@@ -813,6 +815,9 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 
+	reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
	if (IS_ERR(reset))
		return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n");

This could still happen if the device tree is broken or on
-EPROBE_DEFER.
+	reset_control_reset(reset);
+
 	clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk))
 		return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
regards
Philipp

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help