[PATCH] soc: fsl: dpio: protect smp_processor_id when get processor id

Subsystems: freescale soc drivers, the rest

STALE1750d

3 messages, 2 authors, 2021-10-15 · open the first message on its own page

[PATCH] soc: fsl: dpio: protect smp_processor_id when get processor id

From: <hidden>
Date: 2021-10-15 06:36:48

From: Meng Li <redacted>

When enable debug kernel configs,there will be calltrace as below:

BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x20/0x30
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
 dump_backtrace+0x0/0x1a0
 show_stack+0x24/0x30
 dump_stack+0xf0/0x13c
 check_preemption_disabled+0x100/0x110
 debug_smp_processor_id+0x20/0x30
 dpaa2_io_query_fq_count+0xdc/0x154
 dpaa2_eth_stop+0x144/0x314
 __dev_close_many+0xdc/0x160
 __dev_change_flags+0xe8/0x220
 dev_change_flags+0x30/0x70
 ic_close_devs+0x50/0x78
 ip_auto_config+0xed0/0xf10
 do_one_initcall+0xac/0x460
 kernel_init_freeable+0x30c/0x378
 kernel_init+0x20/0x128
 ret_from_fork+0x10/0x38

Because smp_processor_id() should be invoked in preempt disable status.
So, add preempt_disable/enable() to protect smp_processor_id().

Fixes: c89105c9b390 ("staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <redacted>
---
 drivers/soc/fsl/dpio/dpio-service.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 19f47ea9dab0..afc3b89b0fc5 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -58,8 +58,11 @@ static inline struct dpaa2_io *service_select_by_cpu(struct dpaa2_io *d,
 	 * If cpu == -1, choose the current cpu, with no guarantees about
 	 * potentially being migrated away.
 	 */
-	if (cpu < 0)
-		cpu = smp_processor_id();
+        if (cpu < 0) {
+                preempt_disable();
+                cpu = smp_processor_id();
+                preempt_enable();
+        }
 
 	/* If a specific cpu was requested, pick it up immediately */
 	return dpio_by_cpu[cpu];
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] soc: fsl: dpio: protect smp_processor_id when get processor id

From: Robin Murphy <robin.murphy@arm.com>
Date: 2021-10-15 13:40:01

On 2021-10-15 07:36, Meng.Li@windriver.com wrote:
From: Meng Li <redacted>

When enable debug kernel configs,there will be calltrace as below:

BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x20/0x30
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
  dump_backtrace+0x0/0x1a0
  show_stack+0x24/0x30
  dump_stack+0xf0/0x13c
  check_preemption_disabled+0x100/0x110
  debug_smp_processor_id+0x20/0x30
  dpaa2_io_query_fq_count+0xdc/0x154
  dpaa2_eth_stop+0x144/0x314
  __dev_close_many+0xdc/0x160
  __dev_change_flags+0xe8/0x220
  dev_change_flags+0x30/0x70
  ic_close_devs+0x50/0x78
  ip_auto_config+0xed0/0xf10
  do_one_initcall+0xac/0x460
  kernel_init_freeable+0x30c/0x378
  kernel_init+0x20/0x128
  ret_from_fork+0x10/0x38

Because smp_processor_id() should be invoked in preempt disable status.
So, add preempt_disable/enable() to protect smp_processor_id().
If preemption doesn't matter anyway, as the comment in the context 
implies, then it probably makes more sense just to use 
raw_smp_processor_id() instead.

Robin.
quoted hunk
Fixes: c89105c9b390 ("staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <redacted>
---
  drivers/soc/fsl/dpio/dpio-service.c | 7 +++++--
  1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 19f47ea9dab0..afc3b89b0fc5 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -58,8 +58,11 @@ static inline struct dpaa2_io *service_select_by_cpu(struct dpaa2_io *d,
  	 * If cpu == -1, choose the current cpu, with no guarantees about
  	 * potentially being migrated away.
  	 */
-	if (cpu < 0)
-		cpu = smp_processor_id();
+        if (cpu < 0) {
+                preempt_disable();
+                cpu = smp_processor_id();
+                preempt_enable();
+        }
  
  	/* If a specific cpu was requested, pick it up immediately */
  	return dpio_by_cpu[cpu];
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH] soc: fsl: dpio: protect smp_processor_id when get processor id

From: Li, Meng <hidden>
Date: 2021-10-15 16:38:23

-----Original Message-----
From: Robin Murphy <robin.murphy@arm.com>
Sent: Friday, October 15, 2021 9:40 PM
To: Li, Meng <redacted>; Roy.Pledge@nxp.com;
leoyang.li@nxp.com; ruxandra.radulescu@nxp.com; horia.geanta@nxp.com
Cc: linux-kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; linux-arm-
kernel@lists.infradead.org
Subject: Re: [PATCH] soc: fsl: dpio: protect smp_processor_id when get
processor id

[Please note: This e-mail is from an EXTERNAL e-mail address]

On 2021-10-15 07:36, Meng.Li@windriver.com wrote:
quoted
From: Meng Li <redacted>

When enable debug kernel configs,there will be calltrace as below:

BUG: using smp_processor_id() in preemptible [00000000] code:
swapper/0/1 caller is debug_smp_processor_id+0x20/0x30
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT) Call trace:
  dump_backtrace+0x0/0x1a0
  show_stack+0x24/0x30
  dump_stack+0xf0/0x13c
  check_preemption_disabled+0x100/0x110
  debug_smp_processor_id+0x20/0x30
  dpaa2_io_query_fq_count+0xdc/0x154
  dpaa2_eth_stop+0x144/0x314
  __dev_close_many+0xdc/0x160
  __dev_change_flags+0xe8/0x220
  dev_change_flags+0x30/0x70
  ic_close_devs+0x50/0x78
  ip_auto_config+0xed0/0xf10
  do_one_initcall+0xac/0x460
  kernel_init_freeable+0x30c/0x378
  kernel_init+0x20/0x128
  ret_from_fork+0x10/0x38

Because smp_processor_id() should be invoked in preempt disable status.
So, add preempt_disable/enable() to protect smp_processor_id().
If preemption doesn't matter anyway, as the comment in the context implies,
then it probably makes more sense just to use
raw_smp_processor_id() instead.
Thanks for your professional suggest, I will raw_smp_processor_id() and test.
If works fine, I will send v2 patch.

Thanks,
Limeng
Robin.
quoted
Fixes: c89105c9b390 ("staging: fsl-mc: Move DPIO from staging to
drivers/soc/fsl")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <redacted>
---
  drivers/soc/fsl/dpio/dpio-service.c | 7 +++++--
  1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/fsl/dpio/dpio-service.c
b/drivers/soc/fsl/dpio/dpio-service.c
index 19f47ea9dab0..afc3b89b0fc5 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -58,8 +58,11 @@ static inline struct dpaa2_io
*service_select_by_cpu(struct dpaa2_io *d,
quoted
       * If cpu == -1, choose the current cpu, with no guarantees about
       * potentially being migrated away.
       */
-     if (cpu < 0)
-             cpu = smp_processor_id();
+        if (cpu < 0) {
+                preempt_disable();
+                cpu = smp_processor_id();
+                preempt_enable();
+        }

      /* If a specific cpu was requested, pick it up immediately */
      return dpio_by_cpu[cpu];
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help