[PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV

@@ -579,6 +579,8 @@ patternProperties:
     description: Shenzhen Jesurun Electronics Business Dept.
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^joz,.*":
+    description: JOZ BV
   "^kam,.*":
     description: Kamstrup A/S
   "^karo,.*":

@@ -584,6 +584,7 @@ properties:
         items:
           - enum:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
+              - joz,jozacp                # JOZ Access Point
               - kontron,imx6ull-n6411-som # Kontron N6411 SOM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
               - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board

@@ -676,6 +676,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-colibri-emmc-eval-v3.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-jozacp.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
 	imx6ull-opos6uldev.dtb \
 	imx6ull-phytec-segin-ff-rdk-nand.dtb \

@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "JOZ Access Point";
+	compatible = "joz,jozacp", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* On board name LED_RGB1 */
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			pwms = <&pwm1 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			pwms = <&pwm3 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			pwms = <&pwm5 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* On board name LED_RGB2 */
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			pwms = <&pwm2 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			pwms = <&pwm4 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			pwms = <&pwm6 0 10000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vbus>;
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_vbus>;
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sd;
+	non-removable;
+	pm-ignore-notify;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* HW Revision */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+
+			/* HW ID */
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0
+
+			/* Digital inputs */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000
+
+			/* Isolated outputs */
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
+			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
+			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_vbus: vbus0grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_hog>;
+
+	pinctrl_snvs_hog: snvs-hog-grp {
+		fsl,pins = <
+			/* Digital outputs */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020
+
+			/* Digital outputs fault feedback */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
+		>;
+	};
+};