[PATCH] drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

Subsystems: drm drivers, drm drivers and misc gpu patches, drm drivers for vc4, the rest

STALE1823d

3 messages, 2 authors, 2021-10-13 · open the first message on its own page

[PATCH] drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

From: Maxime Ripard <hidden>
Date: 2021-09-23 18:52:55

Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.

However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.

Let's make sure we have the HDMI controller properly powered while
disabling it.

Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <redacted>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 18f5009ce90e..c0df11e5fcf2 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -32,6 +32,7 @@
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/of_device.h>
+#include <linux/pm_runtime.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -42,6 +43,7 @@
 #include <drm/drm_vblank.h>
 
 #include "vc4_drv.h"
+#include "vc4_hdmi.h"
 #include "vc4_regs.h"
 
 #define HVS_FIFO_LATENCY_PIX	6
@@ -496,8 +498,10 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
 	enum vc4_encoder_type encoder_type;
 	const struct vc4_pv_data *pv_data;
 	struct drm_encoder *encoder;
+	struct vc4_hdmi *vc4_hdmi;
 	unsigned encoder_sel;
 	int channel;
+	int ret;
 
 	if (!(of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
 				      "brcm,bcm2711-pixelvalve2") ||
@@ -525,7 +529,20 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
 	if (WARN_ON(!encoder))
 		return 0;
 
-	return vc4_crtc_disable(crtc, encoder, NULL, channel);
+	vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = vc4_crtc_disable(crtc, encoder, NULL, channel);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
+	if (ret)
+		return ret;
+
+	return 0;
 }
 
 static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

From: nicolas saenz julienne <nsaenz@kernel.org>
Date: 2021-09-30 15:42:56

On Thu, 2021-09-23 at 20:50 +0200, Maxime Ripard wrote:
Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.

However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.

Let's make sure we have the HDMI controller properly powered while
disabling it.

Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <redacted>
---
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH] drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

From: Maxime Ripard <hidden>
Date: 2021-10-13 13:27:24

On Thu, 23 Sep 2021 20:50:13 +0200, Maxime Ripard wrote:
Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.

However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.

[...]
Applied to drm/drm-misc (drm-misc-fixes).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help