[PATCH v1 0/6] drm/mediatek: Add mt8195 DisplayPort driver

STALE1778d

Revision v1 of 6 in this series.

12 messages, 2 authors, 2021-09-09 · open the first message on its own page

[PATCH v1 0/6] drm/mediatek: Add mt8195 DisplayPort driver

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-06 19:39:46

Hi everyone,

this series is built around the DisplayPort driver. The dpi/dpintf driver and
the added helper functions are required for the DisplayPort driver to work.

It is version 1 of the patch series following the RFC version:
https://lore.kernel.org/linux-mediatek/20210816192523.1739365-1-msp@baylibre.com/

Note: This patch series is currently tested on v5.10 and I am currently working
on testing it on v5.14.

The series is now based on these patch series and its dependencies:
- Add Mediatek Soc DRM (vdosys0) support for mt8195
  https://lore.kernel.org/linux-mediatek/20210825144833.7757-1-jason-jh.lin@mediatek.com/
- Add MediaTek SoC DRM (vdosys1) support for mt8195
  https://lore.kernel.org/linux-mediatek/20210825100531.5653-1-nancy.lin@mediatek.com/

Changes in v1:
- Added DP binding documentation.
- Addressed feedback from the RFC.
- General cleanups in DPI and DP drivers.
- See individual patches for details on the changes done.

Thanks in advance for any feedback and comments.

Best,
Markus


Markus Schneider-Pargmann (6):
  dt-bindings: mediatek,dpi: Add mt8195 dpintf
  dt-bindings: mediatek,dp: Add Display Port binding
  drm/edid: Add cea_sad helpers for freq/length
  video/hdmi: Add audio_infoframe packing for DP
  drm/mediatek: dpi: Add dpintf support
  drm/mediatek: Add mt8195 DisplayPort driver

 .../display/mediatek/mediatek,dp.yaml         |   89 +
 .../display/mediatek/mediatek,dpi.yaml        |   43 +-
 drivers/gpu/drm/drm_edid.c                    |   57 +
 drivers/gpu/drm/mediatek/Kconfig              |    6 +
 drivers/gpu/drm/mediatek/Makefile             |    2 +
 drivers/gpu/drm/mediatek/mtk_dp.c             | 2881 +++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_dp_reg.h         |  580 ++++
 drivers/gpu/drm/mediatek/mtk_dpi.c            |  248 +-
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h       |   12 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |    4 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |    1 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |    3 +
 drivers/video/hdmi.c                          |   87 +-
 include/drm/drm_edid.h                        |   18 +-
 include/linux/hdmi.h                          |    4 +
 15 files changed, 3958 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
 create mode 100644 drivers/gpu/drm/mediatek/mtk_dp.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_dp_reg.h

-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 1/6] dt-bindings: mediatek,dpi: Add mt8195 dpintf

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-06 19:40:08

DP_INTF is similar to the actual dpi. They differ in some points
regarding registers and what needs to be set but the function blocks
itself are similar in design.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 .../display/mediatek/mediatek,dpi.yaml        | 43 ++++++++++++++++---
 1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..1a158b719ce6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: mediatek DPI/DP_INTF Controller Device Tree Bindings
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
@@ -13,7 +13,8 @@ maintainers:
 description: |
   The Mediatek DPI function block is a sink of the display subsystem and
   provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  output bus. The Mediatek DP_INTF is a similar function block that is
+  connected to the (embedded) display port function block.
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dpintf
 
   reg:
     maxItems: 1
@@ -37,10 +39,11 @@ properties:
       - description: DPI PLL
 
   clock-names:
-    items:
-      - const: pixel
-      - const: engine
-      - const: pll
+    description:
+      For dpi clocks pixel, engine and pll are required. For dpintf pixel,
+      hf_fmm and hf_fdp are required.
+    minItems: 3
+    maxItems: 3
 
   pinctrl-0: true
   pinctrl-1: true
@@ -64,6 +67,34 @@ required:
   - clock-names
   - port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-dpintf
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pixel
+            - const: hf_fmm
+            - const: hf_fdp
+    else:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pixel
+            - const: engine
+            - const: pll
+
 additionalProperties: false
 
 examples:
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 1/6] dt-bindings: mediatek,dpi: Add mt8195 dpintf

From: Sam Ravnborg <hidden>
Date: 2021-09-06 20:16:25

Hi Markus,

On Mon, Sep 06, 2021 at 09:35:24PM +0200, Markus Schneider-Pargmann wrote:
DP_INTF is similar to the actual dpi. They differ in some points
regarding registers and what needs to be set but the function blocks
itself are similar in design.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
I fail to see why they share the same dt-schema as the main content in
the schema is the clocks and they differ.

A new mediatek,dpintf schema seems more appropriate.

I recall I though so when reading the RFC variant but failed to comment on it.

	Sam
quoted hunk
---
 .../display/mediatek/mediatek,dpi.yaml        | 43 ++++++++++++++++---
 1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..1a158b719ce6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: mediatek DPI/DP_INTF Controller Device Tree Bindings
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
@@ -13,7 +13,8 @@ maintainers:
 description: |
   The Mediatek DPI function block is a sink of the display subsystem and
   provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  output bus. The Mediatek DP_INTF is a similar function block that is
+  connected to the (embedded) display port function block.
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dpintf
 
   reg:
     maxItems: 1
@@ -37,10 +39,11 @@ properties:
       - description: DPI PLL
 
   clock-names:
-    items:
-      - const: pixel
-      - const: engine
-      - const: pll
+    description:
+      For dpi clocks pixel, engine and pll are required. For dpintf pixel,
+      hf_fmm and hf_fdp are required.
+    minItems: 3
+    maxItems: 3
 
   pinctrl-0: true
   pinctrl-1: true
@@ -64,6 +67,34 @@ required:
   - clock-names
   - port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-dpintf
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pixel
+            - const: hf_fmm
+            - const: hf_fdp
+    else:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pixel
+            - const: engine
+            - const: pll
+
 additionalProperties: false
 
 examples:
-- 
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 1/6] dt-bindings: mediatek,dpi: Add mt8195 dpintf

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-09 13:38:13

Hi Sam,

On Mon, Sep 06, 2021 at 10:14:05PM +0200, Sam Ravnborg wrote:
Hi Markus,

On Mon, Sep 06, 2021 at 09:35:24PM +0200, Markus Schneider-Pargmann wrote:
quoted
DP_INTF is similar to the actual dpi. They differ in some points
regarding registers and what needs to be set but the function blocks
itself are similar in design.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
I fail to see why they share the same dt-schema as the main content in
the schema is the clocks and they differ.

A new mediatek,dpintf schema seems more appropriate.
Good idea, I will do that. Thank you.

Best,
Markus
I recall I though so when reading the RFC variant but failed to comment on it.

	Sam
quoted
---
 .../display/mediatek/mediatek,dpi.yaml        | 43 ++++++++++++++++---
 1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..1a158b719ce6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: mediatek DPI/DP_INTF Controller Device Tree Bindings
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
@@ -13,7 +13,8 @@ maintainers:
 description: |
   The Mediatek DPI function block is a sink of the display subsystem and
   provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  output bus. The Mediatek DP_INTF is a similar function block that is
+  connected to the (embedded) display port function block.
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dpintf
 
   reg:
     maxItems: 1
@@ -37,10 +39,11 @@ properties:
       - description: DPI PLL
 
   clock-names:
-    items:
-      - const: pixel
-      - const: engine
-      - const: pll
+    description:
+      For dpi clocks pixel, engine and pll are required. For dpintf pixel,
+      hf_fmm and hf_fdp are required.
+    minItems: 3
+    maxItems: 3
 
   pinctrl-0: true
   pinctrl-1: true
@@ -64,6 +67,34 @@ required:
   - clock-names
   - port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-dpintf
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pixel
+            - const: hf_fmm
+            - const: hf_fdp
+    else:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pixel
+            - const: engine
+            - const: pll
+
 additionalProperties: false
 
 examples:
-- 
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 2/6] dt-bindings: mediatek,dp: Add Display Port binding

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-06 19:40:28

This controller is present on different mediatek hardware. Currently
mt8195 and mt8395 have this controller without a functional difference,
so only one compatible is added.

The controller can be in two forms, for a normal display port and for
embedded display port.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---

Notes:
    I added the mediatek maintainers in the list of maintainers as I wasn't sure
    whom I should put there. Please let me know if I am supposed to add my mail
    there.

 .../display/mediatek/mediatek,dp.yaml         | 89 +++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 000000000000..f7a35962c23b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Display Port Controller
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  Device tree bindings for the Mediatek (embedded) Display Port controller
+  present on some Mediatek SoCs.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-edp_tx
+      - mediatek,mt8195-dp_tx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: faxi clock
+
+  clock-names:
+    items:
+      - const: faxi
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller, usually dp_intf
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    dp_tx: edp_tx@1c500000 {
+        compatible = "mediatek,mt8195-edp_tx";
+        reg = <0 0x1c500000 0 0x8000>;
+        interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&edp_pin>;
+        status = "okay";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                edp_in: endpoint {
+                    remote-endpoint = <&dp_intf0_out>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                edp_out: endpoint {
+                	remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 4/6] video/hdmi: Add audio_infoframe packing for DP

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-06 19:41:04

Similar to HDMI, DP uses audio infoframes as well which are structured
very similar to the HDMI ones.

This patch adds a helper function to pack the HDMI audio infoframe for
DP, called hdmi_audio_infoframe_pack_for_dp().
hdmi_audio_infoframe_pack_only() is split into two parts. One of them
packs the payload only and can be used for HDMI and DP.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/video/hdmi.c | 87 +++++++++++++++++++++++++++++++++++---------
 include/linux/hdmi.h |  4 ++
 2 files changed, 73 insertions(+), 18 deletions(-)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 947be761dfa4..59c4341549e4 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -387,6 +387,28 @@ int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame)
 }
 EXPORT_SYMBOL(hdmi_audio_infoframe_check);
 
+static void
+hdmi_audio_infoframe_pack_payload(const struct hdmi_audio_infoframe *frame,
+				  u8 *buffer)
+{
+	u8 channels;
+
+	if (frame->channels >= 2)
+		channels = frame->channels - 1;
+	else
+		channels = 0;
+
+	buffer[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
+	buffer[1] = ((frame->sample_frequency & 0x7) << 2) |
+		 (frame->sample_size & 0x3);
+	buffer[2] = frame->coding_type_ext & 0x1f;
+	buffer[3] = frame->channel_allocation;
+	buffer[4] = (frame->level_shift_value & 0xf) << 3;
+
+	if (frame->downmix_inhibit)
+		buffer[4] |= BIT(7);
+}
+
 /**
  * hdmi_audio_infoframe_pack_only() - write HDMI audio infoframe to binary buffer
  * @frame: HDMI audio infoframe
@@ -404,7 +426,6 @@ EXPORT_SYMBOL(hdmi_audio_infoframe_check);
 ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 				       void *buffer, size_t size)
 {
-	unsigned char channels;
 	u8 *ptr = buffer;
 	size_t length;
 	int ret;
@@ -420,28 +441,13 @@ ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 
 	memset(buffer, 0, size);
 
-	if (frame->channels >= 2)
-		channels = frame->channels - 1;
-	else
-		channels = 0;
-
 	ptr[0] = frame->type;
 	ptr[1] = frame->version;
 	ptr[2] = frame->length;
 	ptr[3] = 0; /* checksum */
 
-	/* start infoframe payload */
-	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
-	ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
-	ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
-		 (frame->sample_size & 0x3);
-	ptr[2] = frame->coding_type_ext & 0x1f;
-	ptr[3] = frame->channel_allocation;
-	ptr[4] = (frame->level_shift_value & 0xf) << 3;
-
-	if (frame->downmix_inhibit)
-		ptr[4] |= BIT(7);
+	hdmi_audio_infoframe_pack_payload(frame,
+					  ptr + HDMI_INFOFRAME_HEADER_SIZE);
 
 	hdmi_infoframe_set_checksum(buffer, length);
 
@@ -479,6 +485,51 @@ ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 }
 EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
 
+/**
+ * hdmi_audio_infoframe_pack_for_dp - Pack a HDMI Audio infoframe for
+ *                                    displayport
+ *
+ * @frame HDMI Audio infoframe
+ * @header Header buffer to be used
+ * @header_size Size of header buffer
+ * @data Data buffer to be used
+ * @data_size Size of data buffer
+ * @dp_version Display Port version to be encoded in the header
+ *
+ * Packs a HDMI Audio Infoframe to be sent over Display Port. This function
+ * fills both header and data buffer with the required data.
+ *
+ * Return: Number of total written bytes or a negative errno on failure.
+ */
+ssize_t hdmi_audio_infoframe_pack_for_dp(struct hdmi_audio_infoframe *frame,
+					 void *header, size_t header_size,
+					 void *data, size_t data_size,
+					 u8 dp_version)
+{
+	int ret;
+	u8 *hdr_ptr = header;
+
+	ret = hdmi_audio_infoframe_check(frame);
+	if (ret)
+		return ret;
+
+	if (header_size < 4 || data_size < frame->length)
+		return -ENOSPC;
+
+	memset(header, 0, header_size);
+	memset(data, 0, data_size);
+
+	// Secondary-data packet header
+	hdr_ptr[1] = frame->type;
+	hdr_ptr[2] = 0x1B;  // As documented by DP spec for Secondary-data Packets
+	hdr_ptr[3] = (dp_version & 0x3f) << 2;
+
+	hdmi_audio_infoframe_pack_payload(frame, data);
+
+	return frame->length + 4;
+}
+EXPORT_SYMBOL(hdmi_audio_infoframe_pack_for_dp);
+
 /**
  * hdmi_vendor_infoframe_init() - initialize an HDMI vendor infoframe
  * @frame: HDMI vendor infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index c8ec982ff498..f576a0b08c85 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -334,6 +334,10 @@ struct hdmi_audio_infoframe {
 int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame);
 ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 				  void *buffer, size_t size);
+ssize_t hdmi_audio_infoframe_pack_for_dp(struct hdmi_audio_infoframe *frame,
+					 void *header, size_t header_size,
+					 void *data, size_t data_size,
+					 u8 dp_version);
 ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 				       void *buffer, size_t size);
 int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame);
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 4/6] video/hdmi: Add audio_infoframe packing for DP

From: Sam Ravnborg <hidden>
Date: 2021-09-06 20:32:32

Hi Markus,

On Mon, Sep 06, 2021 at 09:35:27PM +0200, Markus Schneider-Pargmann wrote:
quoted hunk
Similar to HDMI, DP uses audio infoframes as well which are structured
very similar to the HDMI ones.

This patch adds a helper function to pack the HDMI audio infoframe for
DP, called hdmi_audio_infoframe_pack_for_dp().
hdmi_audio_infoframe_pack_only() is split into two parts. One of them
packs the payload only and can be used for HDMI and DP.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/video/hdmi.c | 87 +++++++++++++++++++++++++++++++++++---------
 include/linux/hdmi.h |  4 ++
 2 files changed, 73 insertions(+), 18 deletions(-)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 947be761dfa4..59c4341549e4 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -387,6 +387,28 @@ int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame)
 }
 EXPORT_SYMBOL(hdmi_audio_infoframe_check);
 
+static void
+hdmi_audio_infoframe_pack_payload(const struct hdmi_audio_infoframe *frame,
+				  u8 *buffer)
+{
+	u8 channels;
+
+	if (frame->channels >= 2)
+		channels = frame->channels - 1;
+	else
+		channels = 0;
+
+	buffer[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
+	buffer[1] = ((frame->sample_frequency & 0x7) << 2) |
+		 (frame->sample_size & 0x3);
+	buffer[2] = frame->coding_type_ext & 0x1f;
+	buffer[3] = frame->channel_allocation;
+	buffer[4] = (frame->level_shift_value & 0xf) << 3;
+
+	if (frame->downmix_inhibit)
+		buffer[4] |= BIT(7);
+}
+
 /**
  * hdmi_audio_infoframe_pack_only() - write HDMI audio infoframe to binary buffer
  * @frame: HDMI audio infoframe
@@ -404,7 +426,6 @@ EXPORT_SYMBOL(hdmi_audio_infoframe_check);
 ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 				       void *buffer, size_t size)
 {
-	unsigned char channels;
 	u8 *ptr = buffer;
 	size_t length;
 	int ret;
@@ -420,28 +441,13 @@ ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 
 	memset(buffer, 0, size);
 
-	if (frame->channels >= 2)
-		channels = frame->channels - 1;
-	else
-		channels = 0;
-
 	ptr[0] = frame->type;
 	ptr[1] = frame->version;
 	ptr[2] = frame->length;
 	ptr[3] = 0; /* checksum */
 
-	/* start infoframe payload */
-	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
-	ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
-	ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
-		 (frame->sample_size & 0x3);
-	ptr[2] = frame->coding_type_ext & 0x1f;
-	ptr[3] = frame->channel_allocation;
-	ptr[4] = (frame->level_shift_value & 0xf) << 3;
-
-	if (frame->downmix_inhibit)
-		ptr[4] |= BIT(7);
+	hdmi_audio_infoframe_pack_payload(frame,
+					  ptr + HDMI_INFOFRAME_HEADER_SIZE);
 
 	hdmi_infoframe_set_checksum(buffer, length);
 
@@ -479,6 +485,51 @@ ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 }
 EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
 
+/**
+ * hdmi_audio_infoframe_pack_for_dp - Pack a HDMI Audio infoframe for
+ *                                    displayport
+ *
+ * @frame HDMI Audio infoframe
+ * @header Header buffer to be used
+ * @header_size Size of header buffer
+ * @data Data buffer to be used
+ * @data_size Size of data buffer
+ * @dp_version Display Port version to be encoded in the header
+ *
+ * Packs a HDMI Audio Infoframe to be sent over Display Port. This function
+ * fills both header and data buffer with the required data.
+ *
+ * Return: Number of total written bytes or a negative errno on failure.
+ */
+ssize_t hdmi_audio_infoframe_pack_for_dp(struct hdmi_audio_infoframe *frame,
+					 void *header, size_t header_size,
+					 void *data, size_t data_size,
+					 u8 dp_version)
+{
+	int ret;
+	u8 *hdr_ptr = header;
+
+	ret = hdmi_audio_infoframe_check(frame);
+	if (ret)
+		return ret;
+
+	if (header_size < 4 || data_size < frame->length)
+		return -ENOSPC;
+
+	memset(header, 0, header_size);
+	memset(data, 0, data_size);
+
+	// Secondary-data packet header
+	hdr_ptr[1] = frame->type;
+	hdr_ptr[2] = 0x1B;  // As documented by DP spec for Secondary-data Packets
Any constant we could use or define and use here?
Hard coding 0x1b is the less desireable option.

	Sam
quoted hunk
+	hdr_ptr[3] = (dp_version & 0x3f) << 2;
+
+	hdmi_audio_infoframe_pack_payload(frame, data);
+
+	return frame->length + 4;
+}
+EXPORT_SYMBOL(hdmi_audio_infoframe_pack_for_dp);
+
 /**
  * hdmi_vendor_infoframe_init() - initialize an HDMI vendor infoframe
  * @frame: HDMI vendor infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index c8ec982ff498..f576a0b08c85 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -334,6 +334,10 @@ struct hdmi_audio_infoframe {
 int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame);
 ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 				  void *buffer, size_t size);
+ssize_t hdmi_audio_infoframe_pack_for_dp(struct hdmi_audio_infoframe *frame,
+					 void *header, size_t header_size,
+					 void *data, size_t data_size,
+					 u8 dp_version);
 ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 				       void *buffer, size_t size);
 int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame);
-- 
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 4/6] video/hdmi: Add audio_infoframe packing for DP

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-07 09:03:44

Hi Sam,

On Mon, Sep 06, 2021 at 10:30:26PM +0200, Sam Ravnborg wrote:
Hi Markus,

On Mon, Sep 06, 2021 at 09:35:27PM +0200, Markus Schneider-Pargmann wrote:
quoted
Similar to HDMI, DP uses audio infoframes as well which are structured
very similar to the HDMI ones.

This patch adds a helper function to pack the HDMI audio infoframe for
DP, called hdmi_audio_infoframe_pack_for_dp().
hdmi_audio_infoframe_pack_only() is split into two parts. One of them
packs the payload only and can be used for HDMI and DP.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/video/hdmi.c | 87 +++++++++++++++++++++++++++++++++++---------
 include/linux/hdmi.h |  4 ++
 2 files changed, 73 insertions(+), 18 deletions(-)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 947be761dfa4..59c4341549e4 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -387,6 +387,28 @@ int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame)
 }
 EXPORT_SYMBOL(hdmi_audio_infoframe_check);
 
+static void
+hdmi_audio_infoframe_pack_payload(const struct hdmi_audio_infoframe *frame,
+				  u8 *buffer)
+{
+	u8 channels;
+
+	if (frame->channels >= 2)
+		channels = frame->channels - 1;
+	else
+		channels = 0;
+
+	buffer[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
+	buffer[1] = ((frame->sample_frequency & 0x7) << 2) |
+		 (frame->sample_size & 0x3);
+	buffer[2] = frame->coding_type_ext & 0x1f;
+	buffer[3] = frame->channel_allocation;
+	buffer[4] = (frame->level_shift_value & 0xf) << 3;
+
+	if (frame->downmix_inhibit)
+		buffer[4] |= BIT(7);
+}
+
 /**
  * hdmi_audio_infoframe_pack_only() - write HDMI audio infoframe to binary buffer
  * @frame: HDMI audio infoframe
@@ -404,7 +426,6 @@ EXPORT_SYMBOL(hdmi_audio_infoframe_check);
 ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 				       void *buffer, size_t size)
 {
-	unsigned char channels;
 	u8 *ptr = buffer;
 	size_t length;
 	int ret;
@@ -420,28 +441,13 @@ ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 
 	memset(buffer, 0, size);
 
-	if (frame->channels >= 2)
-		channels = frame->channels - 1;
-	else
-		channels = 0;
-
 	ptr[0] = frame->type;
 	ptr[1] = frame->version;
 	ptr[2] = frame->length;
 	ptr[3] = 0; /* checksum */
 
-	/* start infoframe payload */
-	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
-	ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
-	ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
-		 (frame->sample_size & 0x3);
-	ptr[2] = frame->coding_type_ext & 0x1f;
-	ptr[3] = frame->channel_allocation;
-	ptr[4] = (frame->level_shift_value & 0xf) << 3;
-
-	if (frame->downmix_inhibit)
-		ptr[4] |= BIT(7);
+	hdmi_audio_infoframe_pack_payload(frame,
+					  ptr + HDMI_INFOFRAME_HEADER_SIZE);
 
 	hdmi_infoframe_set_checksum(buffer, length);
 
@@ -479,6 +485,51 @@ ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 }
 EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
 
+/**
+ * hdmi_audio_infoframe_pack_for_dp - Pack a HDMI Audio infoframe for
+ *                                    displayport
+ *
+ * @frame HDMI Audio infoframe
+ * @header Header buffer to be used
+ * @header_size Size of header buffer
+ * @data Data buffer to be used
+ * @data_size Size of data buffer
+ * @dp_version Display Port version to be encoded in the header
+ *
+ * Packs a HDMI Audio Infoframe to be sent over Display Port. This function
+ * fills both header and data buffer with the required data.
+ *
+ * Return: Number of total written bytes or a negative errno on failure.
+ */
+ssize_t hdmi_audio_infoframe_pack_for_dp(struct hdmi_audio_infoframe *frame,
+					 void *header, size_t header_size,
+					 void *data, size_t data_size,
+					 u8 dp_version)
+{
+	int ret;
+	u8 *hdr_ptr = header;
+
+	ret = hdmi_audio_infoframe_check(frame);
+	if (ret)
+		return ret;
+
+	if (header_size < 4 || data_size < frame->length)
+		return -ENOSPC;
+
+	memset(header, 0, header_size);
+	memset(data, 0, data_size);
+
+	// Secondary-data packet header
+	hdr_ptr[1] = frame->type;
+	hdr_ptr[2] = 0x1B;  // As documented by DP spec for Secondary-data Packets
Any constant we could use or define and use here?
Hard coding 0x1b is the less desireable option.
I couldn't find a constant for this, but I will add one.

Also thanks to looking for these defines, I found a struct dp_sdp that
could be used instead of the header and data pointers which I would
prefer, so I will fix that for the next version.

Thanks for your feedback.

Best,
Markus
	Sam
quoted
+	hdr_ptr[3] = (dp_version & 0x3f) << 2;
+
+	hdmi_audio_infoframe_pack_payload(frame, data);
+
+	return frame->length + 4;
+}
+EXPORT_SYMBOL(hdmi_audio_infoframe_pack_for_dp);
+
 /**
  * hdmi_vendor_infoframe_init() - initialize an HDMI vendor infoframe
  * @frame: HDMI vendor infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index c8ec982ff498..f576a0b08c85 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -334,6 +334,10 @@ struct hdmi_audio_infoframe {
 int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame);
 ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 				  void *buffer, size_t size);
+ssize_t hdmi_audio_infoframe_pack_for_dp(struct hdmi_audio_infoframe *frame,
+					 void *header, size_t header_size,
+					 void *data, size_t data_size,
+					 u8 dp_version);
 ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
 				       void *buffer, size_t size);
 int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame);
-- 
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 5/6] drm/mediatek: dpi: Add dpintf support

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-06 19:41:08

dpintf is the displayport interface hardware unit. This unit is similar
to dpi and can reuse most of the code.

This patch adds support for mt8195-dpintf to this dpi driver. Main
differences are:
 - Some features/functional components are not available for dpintf
   which are now excluded from code execution once is_dpintf is set
 - dpintf can and needs to choose between different clockdividers based
   on the clockspeed. This is done by choosing a different clock parent.
 - There are two additional clocks that need to be managed. These are
   only set for dpintf and will be set to NULL if not supplied. The
   clk_* calls handle these as normal clocks then.
 - Some register contents differ slightly between the two components. To
   work around this I added register bits/masks with a DPINTF_ prefix
   and use them where different.

Based on a separate driver for dpintf created by
Jason-JH.Lin [off-list ref].

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---

Notes:
    Changes RFC -> v1:
    - Remove setting parents and fully rely on the clock tree instead which already
      models a mux at the important place.
    - Integrated mtk_dpi dpintf changes into the mediatek drm driver.

 drivers/gpu/drm/mediatek/mtk_dpi.c          | 248 ++++++++++++++++----
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  12 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   4 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   3 +
 5 files changed, 217 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index e94738fe4db8..986c7f72483f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -71,6 +71,8 @@ struct mtk_dpi {
 	void __iomem *regs;
 	struct device *dev;
 	struct clk *engine_clk;
+	struct clk *hf_fmm_clk;
+	struct clk *hf_fdp_clk;
 	struct clk *pixel_clk;
 	struct clk *tvd_clk;
 	int irq;
@@ -125,6 +127,7 @@ struct mtk_dpi_conf {
 	bool edge_sel_en;
 	const u32 *output_fmts;
 	u32 num_output_fmts;
+	bool is_dpintf;
 };
 
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -153,30 +156,52 @@ static void mtk_dpi_disable(struct mtk_dpi *dpi)
 static void mtk_dpi_config_hsync(struct mtk_dpi *dpi,
 				 struct mtk_dpi_sync_param *sync)
 {
-	mtk_dpi_mask(dpi, DPI_TGEN_HWIDTH,
-		     sync->sync_width << HPW, HPW_MASK);
-	mtk_dpi_mask(dpi, DPI_TGEN_HPORCH,
-		     sync->back_porch << HBP, HBP_MASK);
-	mtk_dpi_mask(dpi, DPI_TGEN_HPORCH, sync->front_porch << HFP,
-		     HFP_MASK);
+	if (dpi->conf->is_dpintf) {
+		mtk_dpi_mask(dpi, DPI_TGEN_HWIDTH,
+			     sync->sync_width << HPW, DPINTF_HPW_MASK);
+		mtk_dpi_mask(dpi, DPI_TGEN_HPORCH,
+			     sync->back_porch << HBP, DPINTF_HBP_MASK);
+		mtk_dpi_mask(dpi, DPI_TGEN_HPORCH, sync->front_porch << HFP,
+			     DPINTF_HFP_MASK);
+	} else {
+		mtk_dpi_mask(dpi, DPI_TGEN_HWIDTH,
+			     sync->sync_width << HPW, HPW_MASK);
+		mtk_dpi_mask(dpi, DPI_TGEN_HPORCH,
+			     sync->back_porch << HBP, HBP_MASK);
+		mtk_dpi_mask(dpi, DPI_TGEN_HPORCH, sync->front_porch << HFP,
+			     HFP_MASK);
+	}
 }
 
 static void mtk_dpi_config_vsync(struct mtk_dpi *dpi,
 				 struct mtk_dpi_sync_param *sync,
 				 u32 width_addr, u32 porch_addr)
 {
-	mtk_dpi_mask(dpi, width_addr,
-		     sync->sync_width << VSYNC_WIDTH_SHIFT,
-		     VSYNC_WIDTH_MASK);
 	mtk_dpi_mask(dpi, width_addr,
 		     sync->shift_half_line << VSYNC_HALF_LINE_SHIFT,
 		     VSYNC_HALF_LINE_MASK);
-	mtk_dpi_mask(dpi, porch_addr,
-		     sync->back_porch << VSYNC_BACK_PORCH_SHIFT,
-		     VSYNC_BACK_PORCH_MASK);
-	mtk_dpi_mask(dpi, porch_addr,
-		     sync->front_porch << VSYNC_FRONT_PORCH_SHIFT,
-		     VSYNC_FRONT_PORCH_MASK);
+
+	if (dpi->conf->is_dpintf) {
+		mtk_dpi_mask(dpi, width_addr,
+			     sync->sync_width << VSYNC_WIDTH_SHIFT,
+			     DPINTF_VSYNC_WIDTH_MASK);
+		mtk_dpi_mask(dpi, porch_addr,
+			     sync->back_porch << VSYNC_BACK_PORCH_SHIFT,
+			     DPINTF_VSYNC_BACK_PORCH_MASK);
+		mtk_dpi_mask(dpi, porch_addr,
+			     sync->front_porch << VSYNC_FRONT_PORCH_SHIFT,
+			     DPINTF_VSYNC_FRONT_PORCH_MASK);
+	} else {
+		mtk_dpi_mask(dpi, width_addr,
+			     sync->sync_width << VSYNC_WIDTH_SHIFT,
+			     VSYNC_WIDTH_MASK);
+		mtk_dpi_mask(dpi, porch_addr,
+			     sync->back_porch << VSYNC_BACK_PORCH_SHIFT,
+			     VSYNC_BACK_PORCH_MASK);
+		mtk_dpi_mask(dpi, porch_addr,
+			     sync->front_porch << VSYNC_FRONT_PORCH_SHIFT,
+			     VSYNC_FRONT_PORCH_MASK);
+	}
 }
 
 static void mtk_dpi_config_vsync_lodd(struct mtk_dpi *dpi,
@@ -210,13 +235,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi *dpi,
 			       struct mtk_dpi_polarities *dpi_pol)
 {
 	unsigned int pol;
+	unsigned int mask;
 
-	pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL) |
-	      (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL) |
-	      (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
+	mask = HSYNC_POL | VSYNC_POL;
+	pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
 	      (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 : VSYNC_POL);
-	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
-		     CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
+	if (!dpi->conf->is_dpintf) {
+		mask |= CK_POL | DE_POL;
+		pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
+			0 : CK_POL) |
+		       (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
+			0 : DE_POL);
+	}
+
+	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
 }
 
 static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
@@ -231,8 +263,13 @@ static void mtk_dpi_config_interface(struct mtk_dpi *dpi, bool inter)
 
 static void mtk_dpi_config_fb_size(struct mtk_dpi *dpi, u32 width, u32 height)
 {
-	mtk_dpi_mask(dpi, DPI_SIZE, width << HSIZE, HSIZE_MASK);
-	mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK);
+	if (dpi->conf->is_dpintf) {
+		mtk_dpi_mask(dpi, DPI_SIZE, width << HSIZE, DPINTF_HSIZE_MASK);
+		mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, DPINTF_VSIZE_MASK);
+	} else {
+		mtk_dpi_mask(dpi, DPI_SIZE, width << HSIZE, HSIZE_MASK);
+		mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK);
+	}
 }
 
 static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi,
@@ -332,12 +369,21 @@ static void mtk_dpi_config_channel_swap(struct mtk_dpi *dpi,
 		break;
 	}
 
-	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, val << CH_SWAP, CH_SWAP_MASK);
+	if (dpi->conf->is_dpintf)
+		mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, val << DPINTF_CH_SWAP,
+			     DPINTF_CH_SWAP_MASK);
+	else
+		mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, val << CH_SWAP,
+			     CH_SWAP_MASK);
 }
 
 static void mtk_dpi_config_yuv422_enable(struct mtk_dpi *dpi, bool enable)
 {
-	mtk_dpi_mask(dpi, DPI_CON, enable ? YUV422_EN : 0, YUV422_EN);
+	if (dpi->conf->is_dpintf)
+		mtk_dpi_mask(dpi, DPI_CON, enable ? DPINTF_YUV422_EN : 0,
+			     DPINTF_YUV422_EN);
+	else
+		mtk_dpi_mask(dpi, DPI_CON, enable ? YUV422_EN : 0, YUV422_EN);
 }
 
 static void mtk_dpi_config_csc_enable(struct mtk_dpi *dpi, bool enable)
@@ -367,19 +413,25 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 	if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_444) ||
 	    (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
 		mtk_dpi_config_yuv422_enable(dpi, false);
-		mtk_dpi_config_csc_enable(dpi, true);
-		mtk_dpi_config_swap_input(dpi, false);
+		if (!dpi->conf->is_dpintf) {
+			mtk_dpi_config_csc_enable(dpi, true);
+			mtk_dpi_config_swap_input(dpi, false);
+		}
 		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
 	} else if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_422) ||
 		   (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
 		mtk_dpi_config_yuv422_enable(dpi, true);
-		mtk_dpi_config_csc_enable(dpi, true);
-		mtk_dpi_config_swap_input(dpi, true);
+		if (!dpi->conf->is_dpintf) {
+			mtk_dpi_config_csc_enable(dpi, true);
+			mtk_dpi_config_swap_input(dpi, true);
+		}
 		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
 	} else {
 		mtk_dpi_config_yuv422_enable(dpi, false);
-		mtk_dpi_config_csc_enable(dpi, false);
-		mtk_dpi_config_swap_input(dpi, false);
+		if (!dpi->conf->is_dpintf) {
+			mtk_dpi_config_csc_enable(dpi, false);
+			mtk_dpi_config_swap_input(dpi, false);
+		}
 		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
 	}
 }
@@ -410,6 +462,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
 		pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
 
 	mtk_dpi_disable(dpi);
+	clk_disable_unprepare(dpi->hf_fdp_clk);
+	clk_disable_unprepare(dpi->hf_fmm_clk);
 	clk_disable_unprepare(dpi->pixel_clk);
 	clk_disable_unprepare(dpi->engine_clk);
 }
@@ -433,12 +487,28 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 		goto err_pixel;
 	}
 
+	ret = clk_prepare_enable(dpi->hf_fmm_clk);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable hf_fmm clock: %d\n", ret);
+		goto err_hf_fmm;
+	}
+
+	ret = clk_prepare_enable(dpi->hf_fdp_clk);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable hf_fdp clock: %d\n", ret);
+		goto err_hf_fdp;
+	}
+
 	if (dpi->pinctrl && dpi->pins_dpi)
 		pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
 
 	mtk_dpi_enable(dpi);
 	return 0;
 
+err_hf_fdp:
+	clk_disable_unprepare(dpi->hf_fmm_clk);
+err_hf_fmm:
+	clk_disable_unprepare(dpi->pixel_clk);
 err_pixel:
 	clk_disable_unprepare(dpi->engine_clk);
 err_refcount:
@@ -472,22 +542,30 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	pll_rate = clk_get_rate(dpi->tvd_clk);
 
 	vm.pixelclock = pll_rate / factor;
-	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
-	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
+	if (dpi->conf->is_dpintf)
+		clk_set_rate(dpi->pixel_clk, vm.pixelclock / 4);
+	else if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
+		 (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
 		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
 	else
 		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
 
-
 	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
 
 	dev_dbg(dpi->dev, "Got  PLL %lu Hz, pixel clock %lu Hz\n",
 		pll_rate, vm.pixelclock);
 
-	limit.c_bottom = 0x0010;
-	limit.c_top = 0x0FE0;
-	limit.y_bottom = 0x0010;
-	limit.y_top = 0x0FE0;
+	if (dpi->conf->is_dpintf) {
+		limit.c_bottom = 0x0000;
+		limit.c_top = 0xFFF;
+		limit.y_bottom = 0x0000;
+		limit.y_top = 0xFFF;
+	} else {
+		limit.c_bottom = 0x0010;
+		limit.c_top = 0x0FE0;
+		limit.y_bottom = 0x0010;
+		limit.y_top = 0x0FE0;
+	}
 
 	dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
 	dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
@@ -495,9 +573,15 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
 	dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
 			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
-	hsync.sync_width = vm.hsync_len;
-	hsync.back_porch = vm.hback_porch;
-	hsync.front_porch = vm.hfront_porch;
+	if (dpi->conf->is_dpintf) {
+		hsync.sync_width = vm.hsync_len / 4;
+		hsync.back_porch = vm.hback_porch / 4;
+		hsync.front_porch = vm.hfront_porch / 4;
+	} else {
+		hsync.sync_width = vm.hsync_len;
+		hsync.back_porch = vm.hback_porch;
+		hsync.front_porch = vm.hfront_porch;
+	}
 	hsync.shift_half_line = false;
 	vsync_lodd.sync_width = vm.vsync_len;
 	vsync_lodd.back_porch = vm.vback_porch;
@@ -539,11 +623,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_channel_limit(dpi, &limit);
 	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
 	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
-	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
-	mtk_dpi_config_2n_h_fre(dpi);
-	mtk_dpi_dual_edge(dpi);
-	mtk_dpi_config_disable_edge(dpi);
+	if (dpi->conf->is_dpintf) {
+		mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
+			     DPINTF_INPUT_2P_EN);
+	} else {
+		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
+		mtk_dpi_config_2n_h_fre(dpi);
+		mtk_dpi_dual_edge(dpi);
+		mtk_dpi_config_disable_edge(dpi);
+	}
 	mtk_dpi_sw_reset(dpi, false);
 
 	return 0;
@@ -687,6 +776,17 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
 	.atomic_reset = drm_atomic_helper_bridge_reset,
 };
 
+static const struct drm_bridge_funcs mtk_dpintf_bridge_funcs = {
+	.attach = mtk_dpi_bridge_attach,
+	.mode_set = mtk_dpi_bridge_mode_set,
+	.disable = mtk_dpi_bridge_disable,
+	.enable = mtk_dpi_bridge_enable,
+	.atomic_check = mtk_dpi_bridge_atomic_check,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+};
+
 void mtk_dpi_start(struct device *dev)
 {
 	struct mtk_dpi *dpi = dev_get_drvdata(dev);
@@ -783,6 +883,16 @@ static unsigned int mt8183_calculate_factor(int clock)
 		return 2;
 }
 
+static unsigned int mt8195_dpintf_calculate_factor(int clock)
+{
+	if (clock < 70000)
+		return 4;
+	else if (clock < 200000)
+		return 2;
+	else
+		return 1;
+}
+
 static const u32 mt8173_output_fmts[] = {
 	MEDIA_BUS_FMT_RGB888_1X24,
 };
@@ -798,6 +908,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
 	.max_clock_khz = 300000,
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+	.is_dpintf = false,
 };
 
 static const struct mtk_dpi_conf mt2701_conf = {
@@ -807,6 +918,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
 	.max_clock_khz = 150000,
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+	.is_dpintf = false,
 };
 
 static const struct mtk_dpi_conf mt8183_conf = {
@@ -815,6 +927,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
 	.max_clock_khz = 100000,
 	.output_fmts = mt8183_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
+	.is_dpintf = false,
 };
 
 static const struct mtk_dpi_conf mt8192_conf = {
@@ -823,6 +936,12 @@ static const struct mtk_dpi_conf mt8192_conf = {
 	.max_clock_khz = 150000,
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+	.is_dpintf = false,
+};
+
+static const struct mtk_dpi_conf mt8195_dpintf_conf = {
+	.cal_factor = mt8195_dpintf_calculate_factor,
+	.is_dpintf = true,
 };
 
 static int mtk_dpi_probe(struct platform_device *pdev)
@@ -868,13 +987,16 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dpi->engine_clk = devm_clk_get(dev, "engine");
-	if (IS_ERR(dpi->engine_clk)) {
-		ret = PTR_ERR(dpi->engine_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get engine clock: %d\n", ret);
+	if (!dpi->conf->is_dpintf) {
+		dpi->engine_clk = devm_clk_get(dev, "engine");
+		if (IS_ERR(dpi->engine_clk)) {
+			ret = PTR_ERR(dpi->engine_clk);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get engine clock: %d\n",
+					ret);
 
-		return ret;
+			return ret;
+		}
 	}
 
 	dpi->pixel_clk = devm_clk_get(dev, "pixel");
@@ -895,6 +1017,24 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	dpi->hf_fmm_clk = devm_clk_get_optional(dev, "hf_fmm");
+	if (IS_ERR(dpi->hf_fmm_clk)) {
+		ret = PTR_ERR(dpi->hf_fmm_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get hf_fmm clock: %d\n", ret);
+
+		return ret;
+	}
+
+	dpi->hf_fdp_clk = devm_clk_get_optional(dev, "hf_fdp");
+	if (IS_ERR(dpi->hf_fdp_clk)) {
+		ret = PTR_ERR(dpi->hf_fdp_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get hf_fdp clock: %d\n", ret);
+
+		return ret;
+	}
+
 	dpi->irq = platform_get_irq(pdev, 0);
 	if (dpi->irq <= 0)
 		return -EINVAL;
@@ -908,7 +1048,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dpi);
 
-	dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
+	if (dpi->conf->is_dpintf)
+		dpi->bridge.funcs = &mtk_dpintf_bridge_funcs;
+	else
+		dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
 	dpi->bridge.of_node = dev->of_node;
 	dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
 
@@ -947,6 +1090,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
 	{ .compatible = "mediatek,mt8192-dpi",
 	  .data = &mt8192_conf,
 	},
+	{ .compatible = "mediatek,mt8195-dpintf",
+	  .data = &mt8195_dpintf_conf,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids);
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 3a02fabe1662..72efe6ee2584 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -40,10 +40,14 @@
 #define FAKE_DE_LEVEN			BIT(21)
 #define FAKE_DE_RODD			BIT(22)
 #define FAKE_DE_REVEN			BIT(23)
+#define DPINTF_YUV422_EN		BIT(24)
+#define DPINTF_INPUT_2P_EN		BIT(29)
 
 #define DPI_OUTPUT_SETTING	0x14
 #define CH_SWAP				0
+#define DPINTF_CH_SWAP			BIT(1)
 #define CH_SWAP_MASK			(0x7 << 0)
+#define DPINTF_CH_SWAP_MASK		(0x7 << 1)
 #define SWAP_RGB			0x00
 #define SWAP_GBR			0x01
 #define SWAP_BRG			0x02
@@ -80,8 +84,10 @@
 #define DPI_SIZE		0x18
 #define HSIZE				0
 #define HSIZE_MASK			(0x1FFF << 0)
+#define DPINTF_HSIZE_MASK		(0xFFFF << 0)
 #define VSIZE				16
 #define VSIZE_MASK			(0x1FFF << 16)
+#define DPINTF_VSIZE_MASK		(0xFFFF << 16)
 
 #define DPI_DDR_SETTING		0x1C
 #define DDR_EN				BIT(0)
@@ -93,24 +99,30 @@
 #define DPI_TGEN_HWIDTH		0x20
 #define HPW				0
 #define HPW_MASK			(0xFFF << 0)
+#define DPINTF_HPW_MASK			(0xFFFF << 0)
 
 #define DPI_TGEN_HPORCH		0x24
 #define HBP				0
 #define HBP_MASK			(0xFFF << 0)
+#define DPINTF_HBP_MASK			(0xFFFF << 0)
 #define HFP				16
 #define HFP_MASK			(0xFFF << 16)
+#define DPINTF_HFP_MASK			(0xFFFF << 16)
 
 #define DPI_TGEN_VWIDTH		0x28
 #define DPI_TGEN_VPORCH		0x2C
 
 #define VSYNC_WIDTH_SHIFT		0
 #define VSYNC_WIDTH_MASK		(0xFFF << 0)
+#define DPINTF_VSYNC_WIDTH_MASK		(0xFFFF << 0)
 #define VSYNC_HALF_LINE_SHIFT		16
 #define VSYNC_HALF_LINE_MASK		BIT(16)
 #define VSYNC_BACK_PORCH_SHIFT		0
 #define VSYNC_BACK_PORCH_MASK		(0xFFF << 0)
+#define DPINTF_VSYNC_BACK_PORCH_MASK	(0xFFFF << 0)
 #define VSYNC_FRONT_PORCH_SHIFT		16
 #define VSYNC_FRONT_PORCH_MASK		(0xFFF << 16)
+#define DPINTF_VSYNC_FRONT_PORCH_MASK	(0xFFFF << 16)
 
 #define DPI_BG_HCNTL		0x30
 #define BG_RIGHT			(0x1FFF << 0)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 900f9c9f61f3..871800b4b6ca 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -376,6 +376,7 @@ static const char * const mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
 	[MTK_DISP_UFOE] = "ufoe",
 	[MTK_DISP_WDMA] = "wdma",
 	[MTK_DPI] = "dpi",
+	[MTK_DP_INTF] = "dp-intf",
 	[MTK_DSI] = "dsi",
 };
 
@@ -395,6 +396,8 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_DITHER]	= { MTK_DISP_DITHER,	0, &ddp_dither },
 	[DDP_COMPONENT_DPI0]	= { MTK_DPI,		0, &ddp_dpi },
 	[DDP_COMPONENT_DPI1]	= { MTK_DPI,		1, &ddp_dpi },
+	[DDP_COMPONENT_DP_INTF0]= { MTK_DP_INTF,	0, &ddp_dpi },
+	[DDP_COMPONENT_DP_INTF1]= { MTK_DP_INTF,	1, &ddp_dpi },
 	[DDP_COMPONENT_DSC0]	= { MTK_DISP_DSC,	0, &ddp_dsc },
 	[DDP_COMPONENT_DSC1]	= { MTK_DISP_DSC,	1, &ddp_dsc },
 	[DDP_COMPONENT_DSI0]	= { MTK_DSI,		0, &ddp_dsi },
@@ -547,6 +550,7 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	    type == MTK_DISP_PWM ||
 	    type == MTK_DISP_RDMA ||
 	    type == MTK_DPI ||
+	    type == MTK_DP_INTF ||
 	    type == MTK_DSI)
 		return 0;
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index a8e5e770ce2f..9f47e883cc91 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -36,6 +36,7 @@ enum mtk_ddp_comp_type {
 	MTK_DISP_UFOE,
 	MTK_DISP_WDMA,
 	MTK_DPI,
+	MTK_DP_INTF,
 	MTK_DSI,
 	MTK_DDP_COMP_TYPE_MAX,
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index e831175a66f3..a8c6b9708e34 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -728,6 +728,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt8183-dpi",
 	  .data = (void *)MTK_DPI },
+	{ .compatible = "mediatek,mt8195-dpintf",
+	  .data = (void *)MTK_DP_INTF },
 	{ .compatible = "mediatek,mt2701-dsi",
 	  .data = (void *)MTK_DSI },
 	{ .compatible = "mediatek,mt8173-dsi",
@@ -827,6 +829,7 @@ static int mtk_drm_probe(struct platform_device *pdev)
 		    comp_type == MTK_DISP_OVL_ADAPTOR ||
 		    comp_type == MTK_DISP_RDMA ||
 		    comp_type == MTK_DPI ||
+		    comp_type == MTK_DP_INTF ||
 		    comp_type == MTK_DSI) {
 			dev_info(dev, "Adding component match for %pOF\n",
 				 node);
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/6] drm/edid: Add cea_sad helpers for freq/length

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-06 19:41:16

This patch adds two helper functions that extract the frequency and word
length from a struct cea_sad.

For these helper functions new defines are added that help translate the
'freq' and 'byte2' fields into real numbers.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/gpu/drm/drm_edid.c | 57 ++++++++++++++++++++++++++++++++++++++
 include/drm/drm_edid.h     | 18 ++++++++++--
 2 files changed, 73 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 81d5f2524246..2389d34ce10e 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4666,6 +4666,63 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 }
 EXPORT_SYMBOL(drm_edid_to_speaker_allocation);
 
+/**
+ * drm_cea_sad_get_sample_rate - Extract the sample rate from cea_sad
+ * @sad: Pointer to the cea_sad struct
+ *
+ * Extracts the cea_sad frequency field and returns the sample rate in Hz.
+ *
+ * Return: Sample rate in Hz or a negative errno if parsing failed.
+ */
+int drm_cea_sad_get_sample_rate(struct cea_sad *sad)
+{
+	switch (sad->freq) {
+	case CEA_SAD_FREQ_32KHZ:
+		return 32000;
+	case CEA_SAD_FREQ_44KHZ:
+		return 44100;
+	case CEA_SAD_FREQ_48KHZ:
+		return 48000;
+	case CEA_SAD_FREQ_88KHZ:
+		return 88200;
+	case CEA_SAD_FREQ_96KHZ:
+		return 96000;
+	case CEA_SAD_FREQ_176KHZ:
+		return 176400;
+	case CEA_SAD_FREQ_192KHZ:
+		return 192000;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(drm_cea_sad_get_sample_rate);
+
+/**
+ * drm_cea_sad_get_uncompressed_word_length - Extract word length
+ * @sad: Pointer to the cea_sad struct
+ *
+ * Extracts the cea_sad byte2 field and returns the word length for an
+ * uncompressed stream.
+ *
+ * Note: This function may only be called for uncompressed audio.
+ *
+ * Return: Word length in bits or a negative errno if parsing failed.
+ */
+int drm_cea_sad_get_uncompressed_word_length(struct cea_sad *sad)
+{
+	switch (sad->byte2) {
+	case CEA_SAD_UNCOMPRESSED_WORD_16BIT:
+		return 16;
+	case CEA_SAD_UNCOMPRESSED_WORD_20BIT:
+		return 20;
+	case CEA_SAD_UNCOMPRESSED_WORD_24BIT:
+		return 24;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(drm_cea_sad_get_uncompressed_word_length);
+
 /**
  * drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay
  * @connector: connector associated with the HDMI/DP sink
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 759328a5eeb2..bed091a749ef 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -361,12 +361,24 @@ struct edid {
 
 /* Short Audio Descriptor */
 struct cea_sad {
-	u8 format;
+	u8 format; /* See HDMI_AUDIO_CODING_TYPE_* */
 	u8 channels; /* max number of channels - 1 */
-	u8 freq;
+	u8 freq; /* See CEA_SAD_FREQ_* */
 	u8 byte2; /* meaning depends on format */
 };
 
+#define CEA_SAD_FREQ_32KHZ  BIT(0)
+#define CEA_SAD_FREQ_44KHZ  BIT(1)
+#define CEA_SAD_FREQ_48KHZ  BIT(2)
+#define CEA_SAD_FREQ_88KHZ  BIT(3)
+#define CEA_SAD_FREQ_96KHZ  BIT(4)
+#define CEA_SAD_FREQ_176KHZ BIT(5)
+#define CEA_SAD_FREQ_192KHZ BIT(6)
+
+#define CEA_SAD_UNCOMPRESSED_WORD_16BIT BIT(0)
+#define CEA_SAD_UNCOMPRESSED_WORD_20BIT BIT(1)
+#define CEA_SAD_UNCOMPRESSED_WORD_24BIT BIT(2)
+
 struct drm_encoder;
 struct drm_connector;
 struct drm_connector_state;
@@ -374,6 +386,8 @@ struct drm_display_mode;
 
 int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
 int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb);
+int drm_cea_sad_get_sample_rate(struct cea_sad *sad);
+int drm_cea_sad_get_uncompressed_word_length(struct cea_sad *sad);
 int drm_av_sync_delay(struct drm_connector *connector,
 		      const struct drm_display_mode *mode);
 
-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/6] drm/edid: Add cea_sad helpers for freq/length

From: Sam Ravnborg <hidden>
Date: 2021-09-06 20:20:51

Hi Markus,

On Mon, Sep 06, 2021 at 09:35:26PM +0200, Markus Schneider-Pargmann wrote:
quoted hunk
This patch adds two helper functions that extract the frequency and word
length from a struct cea_sad.

For these helper functions new defines are added that help translate the
'freq' and 'byte2' fields into real numbers.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/gpu/drm/drm_edid.c | 57 ++++++++++++++++++++++++++++++++++++++
 include/drm/drm_edid.h     | 18 ++++++++++--
 2 files changed, 73 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 81d5f2524246..2389d34ce10e 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4666,6 +4666,63 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 }
 EXPORT_SYMBOL(drm_edid_to_speaker_allocation);
 
+/**
+ * drm_cea_sad_get_sample_rate - Extract the sample rate from cea_sad
+ * @sad: Pointer to the cea_sad struct
+ *
+ * Extracts the cea_sad frequency field and returns the sample rate in Hz.
+ *
+ * Return: Sample rate in Hz or a negative errno if parsing failed.
+ */
+int drm_cea_sad_get_sample_rate(struct cea_sad *sad)
It would be nice to use const struct cea_sad *sad here.
+{
+	switch (sad->freq) {
+	case CEA_SAD_FREQ_32KHZ:
+		return 32000;
+	case CEA_SAD_FREQ_44KHZ:
+		return 44100;
+	case CEA_SAD_FREQ_48KHZ:
+		return 48000;
+	case CEA_SAD_FREQ_88KHZ:
+		return 88200;
+	case CEA_SAD_FREQ_96KHZ:
+		return 96000;
+	case CEA_SAD_FREQ_176KHZ:
+		return 176400;
+	case CEA_SAD_FREQ_192KHZ:
+		return 192000;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(drm_cea_sad_get_sample_rate);
+
+/**
+ * drm_cea_sad_get_uncompressed_word_length - Extract word length
+ * @sad: Pointer to the cea_sad struct
+ *
+ * Extracts the cea_sad byte2 field and returns the word length for an
+ * uncompressed stream.
+ *
+ * Note: This function may only be called for uncompressed audio.
Can you check or this and WARN (or drm_WARN) if this is not the case?
+ *
+ * Return: Word length in bits or a negative errno if parsing failed.
+ */
+int drm_cea_sad_get_uncompressed_word_length(struct cea_sad *sad)
Again, consider to use const.

	Sam
quoted hunk
+{
+	switch (sad->byte2) {
+	case CEA_SAD_UNCOMPRESSED_WORD_16BIT:
+		return 16;
+	case CEA_SAD_UNCOMPRESSED_WORD_20BIT:
+		return 20;
+	case CEA_SAD_UNCOMPRESSED_WORD_24BIT:
+		return 24;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(drm_cea_sad_get_uncompressed_word_length);
+
 /**
  * drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay
  * @connector: connector associated with the HDMI/DP sink
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 759328a5eeb2..bed091a749ef 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -361,12 +361,24 @@ struct edid {
 
 /* Short Audio Descriptor */
 struct cea_sad {
-	u8 format;
+	u8 format; /* See HDMI_AUDIO_CODING_TYPE_* */
 	u8 channels; /* max number of channels - 1 */
-	u8 freq;
+	u8 freq; /* See CEA_SAD_FREQ_* */
 	u8 byte2; /* meaning depends on format */
 };
 
+#define CEA_SAD_FREQ_32KHZ  BIT(0)
+#define CEA_SAD_FREQ_44KHZ  BIT(1)
+#define CEA_SAD_FREQ_48KHZ  BIT(2)
+#define CEA_SAD_FREQ_88KHZ  BIT(3)
+#define CEA_SAD_FREQ_96KHZ  BIT(4)
+#define CEA_SAD_FREQ_176KHZ BIT(5)
+#define CEA_SAD_FREQ_192KHZ BIT(6)
+
+#define CEA_SAD_UNCOMPRESSED_WORD_16BIT BIT(0)
+#define CEA_SAD_UNCOMPRESSED_WORD_20BIT BIT(1)
+#define CEA_SAD_UNCOMPRESSED_WORD_24BIT BIT(2)
+
 struct drm_encoder;
 struct drm_connector;
 struct drm_connector_state;
@@ -374,6 +386,8 @@ struct drm_display_mode;
 
 int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
 int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb);
+int drm_cea_sad_get_sample_rate(struct cea_sad *sad);
+int drm_cea_sad_get_uncompressed_word_length(struct cea_sad *sad);
 int drm_av_sync_delay(struct drm_connector *connector,
 		      const struct drm_display_mode *mode);
 
-- 
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/6] drm/edid: Add cea_sad helpers for freq/length

From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2021-09-07 07:40:12

Hi Sam,

On Mon, Sep 06, 2021 at 10:19:00PM +0200, Sam Ravnborg wrote:
Hi Markus,

On Mon, Sep 06, 2021 at 09:35:26PM +0200, Markus Schneider-Pargmann wrote:
quoted
This patch adds two helper functions that extract the frequency and word
length from a struct cea_sad.

For these helper functions new defines are added that help translate the
'freq' and 'byte2' fields into real numbers.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/gpu/drm/drm_edid.c | 57 ++++++++++++++++++++++++++++++++++++++
 include/drm/drm_edid.h     | 18 ++++++++++--
 2 files changed, 73 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 81d5f2524246..2389d34ce10e 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4666,6 +4666,63 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 }
 EXPORT_SYMBOL(drm_edid_to_speaker_allocation);
 
+/**
+ * drm_cea_sad_get_sample_rate - Extract the sample rate from cea_sad
+ * @sad: Pointer to the cea_sad struct
+ *
+ * Extracts the cea_sad frequency field and returns the sample rate in Hz.
+ *
+ * Return: Sample rate in Hz or a negative errno if parsing failed.
+ */
+int drm_cea_sad_get_sample_rate(struct cea_sad *sad)
It would be nice to use const struct cea_sad *sad here.
Thanks, fixing it for the next version.
quoted
+{
+	switch (sad->freq) {
+	case CEA_SAD_FREQ_32KHZ:
+		return 32000;
+	case CEA_SAD_FREQ_44KHZ:
+		return 44100;
+	case CEA_SAD_FREQ_48KHZ:
+		return 48000;
+	case CEA_SAD_FREQ_88KHZ:
+		return 88200;
+	case CEA_SAD_FREQ_96KHZ:
+		return 96000;
+	case CEA_SAD_FREQ_176KHZ:
+		return 176400;
+	case CEA_SAD_FREQ_192KHZ:
+		return 192000;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(drm_cea_sad_get_sample_rate);
+
+/**
+ * drm_cea_sad_get_uncompressed_word_length - Extract word length
+ * @sad: Pointer to the cea_sad struct
+ *
+ * Extracts the cea_sad byte2 field and returns the word length for an
+ * uncompressed stream.
+ *
+ * Note: This function may only be called for uncompressed audio.
Can you check or this and WARN (or drm_WARN) if this is not the case?
Good idea, I added a check, a DRM_WARN and return -EINVAL now.

Thanks,
Markus
quoted
+ *
+ * Return: Word length in bits or a negative errno if parsing failed.
+ */
+int drm_cea_sad_get_uncompressed_word_length(struct cea_sad *sad)
Again, consider to use const.

	Sam
quoted
+{
+	switch (sad->byte2) {
+	case CEA_SAD_UNCOMPRESSED_WORD_16BIT:
+		return 16;
+	case CEA_SAD_UNCOMPRESSED_WORD_20BIT:
+		return 20;
+	case CEA_SAD_UNCOMPRESSED_WORD_24BIT:
+		return 24;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(drm_cea_sad_get_uncompressed_word_length);
+
 /**
  * drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay
  * @connector: connector associated with the HDMI/DP sink
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 759328a5eeb2..bed091a749ef 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -361,12 +361,24 @@ struct edid {
 
 /* Short Audio Descriptor */
 struct cea_sad {
-	u8 format;
+	u8 format; /* See HDMI_AUDIO_CODING_TYPE_* */
 	u8 channels; /* max number of channels - 1 */
-	u8 freq;
+	u8 freq; /* See CEA_SAD_FREQ_* */
 	u8 byte2; /* meaning depends on format */
 };
 
+#define CEA_SAD_FREQ_32KHZ  BIT(0)
+#define CEA_SAD_FREQ_44KHZ  BIT(1)
+#define CEA_SAD_FREQ_48KHZ  BIT(2)
+#define CEA_SAD_FREQ_88KHZ  BIT(3)
+#define CEA_SAD_FREQ_96KHZ  BIT(4)
+#define CEA_SAD_FREQ_176KHZ BIT(5)
+#define CEA_SAD_FREQ_192KHZ BIT(6)
+
+#define CEA_SAD_UNCOMPRESSED_WORD_16BIT BIT(0)
+#define CEA_SAD_UNCOMPRESSED_WORD_20BIT BIT(1)
+#define CEA_SAD_UNCOMPRESSED_WORD_24BIT BIT(2)
+
 struct drm_encoder;
 struct drm_connector;
 struct drm_connector_state;
@@ -374,6 +386,8 @@ struct drm_display_mode;
 
 int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
 int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb);
+int drm_cea_sad_get_sample_rate(struct cea_sad *sad);
+int drm_cea_sad_get_uncompressed_word_length(struct cea_sad *sad);
 int drm_av_sync_delay(struct drm_connector *connector,
 		      const struct drm_display_mode *mode);
 
-- 
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help