[PATCH] watchdog: s3c2410: describe driver in KConfig
From: Krzysztof Kozlowski <hidden>
Date: 2021-09-24 13:30:15
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <redacted> --- drivers/watchdog/Kconfig | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b81fe4f7d434..75591ba261e2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig@@ -496,16 +496,18 @@ config S3C2410_WATCHDOG select WATCHDOG_CORE select MFD_SYSCON if ARCH_EXYNOS help - Watchdog timer block in the Samsung SoCs. This will reboot - the system when the timer expires with the watchdog enabled. + Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and + Exynos SoCs. This will reboot the system when the timer expires with + the watchdog enabled. The driver is limited by the speed of the system's PCLK signal, so with reasonably fast systems (PCLK around 50-66MHz) then watchdog intervals of over approximately 20seconds are unavailable. + Choose Y/M here only if you build for such Samsung SoC. The driver can be built as a module by choosing M, and will - be called s3c2410_wdt + be called s3c2410_wdt. config SA1100_WATCHDOG tristate "SA1100/PXA2xx watchdog"
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel