[PATCH] ARM: dts: imx6dl-b1x5v2: drop unsupported vcc-supply for MPL3115A2

The MPL3115A2 I2C pressure sensor driver does not take a VCC regulator.
The bindings are so far trivial, but the datasheet does not have a VCC
pin.

Signed-off-by: Krzysztof Kozlowski <redacted>
---
 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
index a326a331508e..f028b6a191df 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
+++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi

@@ -47,7 +47,6 @@ &i2c5 {
 	mpl3115a2: pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
-		vcc-supply = <&reg_3v3_acm>;
 
 		/*
 		 * The MPL3115 interrupts are connected to pin 22 and 23

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Hi,

On Mon, Sep 20, 2021 at 08:22:27PM +0200, Krzysztof Kozlowski wrote:

The MPL3115A2 I2C pressure sensor driver does not take a VCC regulator.
The bindings are so far trivial, but the datasheet does not have a VCC
pin.

Signed-off-by: Krzysztof Kozlowski <redacted>
---

Reviewed-by: Sebastian Reichel <redacted>

FWIW &reg_3v3_acm is connected to VDD obviously, but it's an
always-on regulator without any means to control it, so there
is no need to describe it.

-- Sebastian

On Mon, Sep 20, 2021 at 08:22:27PM +0200, Krzysztof Kozlowski wrote:

The MPL3115A2 I2C pressure sensor driver does not take a VCC regulator.
The bindings are so far trivial, but the datasheet does not have a VCC
pin.

Signed-off-by: Krzysztof Kozlowski <redacted>

Applied, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel