[PATCH] arm64: dts: imx8mq-kontron-pitx-imx8m: remove vqmmc-supply node

The sw4 output (V_1V8_S0 voltage) from the PMIC is also used as supply
for the eMMC. This voltage can not be changed and is not allowed to
switched off. So we do not want to provide this regulator to the SDHC
driver to control this voltage.

Signed-off-by: Heiko Thiery <redacted>
---
 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index f593e4ff62e1..436d98135ba9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

@@ -348,7 +348,6 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	vqmmc-supply = <&sw4_reg>;
 	bus-width = <8>;
 	non-removable;
 	no-sd;

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Hi Heiko,

On Mon, Sep 13, 2021 at 4:16 PM Heiko Thiery [off-list ref] wrote:

The sw4 output (V_1V8_S0 voltage) from the PMIC is also used as supply
for the eMMC. This voltage can not be changed and is not allowed to
switched off. So we do not want to provide this regulator to the SDHC
driver to control this voltage.

A Fixes tag would be appropriate here.

Signed-off-by: Heiko Thiery <redacted>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel