[PATCH v4] usb: ehci: handshake CMD_RUN instead of STS_HALT

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Tao Ren <redacted>
Tested-by: Tao Ren <redacted>
---
 drivers/usb/host/ehci-hcd.c      | 11 ++++++++++-
 drivers/usb/host/ehci-platform.c |  6 ++++++
 drivers/usb/host/ehci.h          |  1 +
 3 files changed, 17 insertions(+), 1 deletion(-)

---
Fix STS_HALT handshake failure for Aspeed 2500/2600 platform.

Change since v3:
- Add more description.

Change since v2:
- Use my "real" name for both the Signed-off-by: line and the From: line.

Change since v1:
- Handshake CMD_RUN status on startup instead of easily skip it.
---

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6bdc6d6bf74d..55f92d25336b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c

@@ -634,7 +634,16 @@ static int ehci_run (struct usb_hcd *hcd)
 	/* Wait until HC become operational */
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
-	rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
+	/* For Aspeed, STS_HALT also depends on ASS/PSS status.
+	 * Check CMD_RUN instead.
+	 */
+	if (ehci->is_aspeed)
+		rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+				    1, 100 * 1000);
+	else
+		rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+				    0, 100 * 1000);
 
 	up_write(&ehci_cf_port_reset_rwsem);
 

diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index c70f2d0b4aaf..c3dc906274d9 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c

@@ -297,6 +297,12 @@ static int ehci_platform_probe(struct platform_device *dev)
 					  "has-transaction-translator"))
 			hcd->has_tt = 1;
 
+		if (of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2500-ehci") ||
+		    of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2600-ehci"))
+			ehci->is_aspeed = 1;
+
 		if (soc_device_match(quirk_poll_match))
 			priv->quirk_poll = true;
 

diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 80bb823aa9fe..fdd073cc053b 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h

@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 	unsigned		spurious_oc:1;
+	unsigned		is_aspeed:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Hi Greg,

On Fri, 10 Sept 2021 at 07:38, Neal Liu [off-list ref] wrote:

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Tao Ren <redacted>
Tested-by: Tao Ren <redacted>

Has this one gone in? If not, here's some tags:

Reviewed-by: Joel Stanley <joel@jms.id.au>

It also needs to go to stable:

Cc: stable@vger.kernel.org
Fixes: 280a9045bb18 ("ehci: fix EHCI host controller initialization sequence")

Cheers,

Joel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

On Wed, Oct 06, 2021 at 01:27:02AM +0000, Joel Stanley wrote:

Hi Greg,

On Fri, 10 Sept 2021 at 07:38, Neal Liu [off-list ref] wrote:

quoted

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Tao Ren <redacted>
Tested-by: Tao Ren <redacted>

Has this one gone in? If not, here's some tags:

Reviewed-by: Joel Stanley <joel@jms.id.au>

It also needs to go to stable:

Cc: stable@vger.kernel.org
Fixes: 280a9045bb18 ("ehci: fix EHCI host controller initialization sequence")

This is already in my tree, but waiting until 5.16-rc1, sorry.  You can
see it at commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of
STS_HALT") in linux-next.  I'll try to remember to queue it up in stable
after it hits Linus's tree.

thanks,

greg k-h

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

On Wed, Oct 06, 2021 at 01:27:02AM +0000, Joel Stanley wrote:

Hi Greg,

On Fri, 10 Sept 2021 at 07:38, Neal Liu [off-list ref] wrote:

quoted

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Tao Ren <redacted>
Tested-by: Tao Ren <redacted>

Has this one gone in? If not, here's some tags:

Reviewed-by: Joel Stanley <joel@jms.id.au>

It also needs to go to stable:

Cc: stable@vger.kernel.org
Fixes: 280a9045bb18 ("ehci: fix EHCI host controller initialization sequence")

This patch failed to apply to 4.4.y, 4.9.y, and 4.14.y, so could you
provide a working backport for those kernels for me to be able to queue
it up to the stable queues there?

thanks,

greg k-h

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel